Snedboy 0 Posted August 1, 2006 Report Share Posted August 1, 2006 Too lazy to type again so here's a linkhttp://www.mk2vr6.com/board/viewtopic.php?t=1089 Link to post Share on other sites
VR6Pete 1,455 Posted August 1, 2006 Report Share Posted August 1, 2006 You could always copy and paste the text Link to post Share on other sites
Snedboy 0 Posted August 1, 2006 Author Report Share Posted August 1, 2006 My car suddenly started to missfire so i treated it to a full sefvice i.e plugs,leads,oil,oil filter and it didnt help so i then cleaned the ISV,MAF and throttle body and still didnt help.I then noticed my coilpack had a broken plug connector and have now replaced this with a perfect working one and its still not running right.When it waseant running right i took leads off to see what cylinder it was down on and hoped that it was the coilpack but unfortunatly it waseant so basically im wondering what it could be.I was told by a reputable VW tuner that it prob would be the MAf but i am starting to think that its my rings on the cylinder that is down.Any help or views would be greatly appreciated. Link to post Share on other sites
puddy 0 Posted August 1, 2006 Report Share Posted August 1, 2006 hi mate, just make sure you put your leads on in correct order,simple mistake to make, it runs like a bag of crap if you get one wrong, I know cuz I did it. Pudd. Link to post Share on other sites
Snedboy 0 Posted August 1, 2006 Author Report Share Posted August 1, 2006 Yip its defo not that m8 wish it was as simple as that :-( Link to post Share on other sites
VR6Pete 1,455 Posted August 1, 2006 Report Share Posted August 1, 2006 Have you tried getting it on VAG-COM? Link to post Share on other sites
Ciaran 4 Posted August 1, 2006 Report Share Posted August 1, 2006 aint the MAF mate as mine was broken and the car ran ok it just overfuelled at realy low revs but was fine once above 1500. check all the connections and let the car run at night somewhere dark and open the bonnet see if their is any arking anywhere. Link to post Share on other sites
Snedboy 0 Posted August 2, 2006 Author Report Share Posted August 2, 2006 Went out and tried to see for any arching but to no avail!!! This is really starting to get me down as its for sale and dont want to pass the buck!! :-( Link to post Share on other sites
Snedboy 0 Posted August 2, 2006 Author Report Share Posted August 2, 2006 Does anybody know how many pins are on the OBD port and what colour the connector is i.e from the back of the connector just so i get the rite one if i ever find it!!! Link to post Share on other sites
Recommended Posts