coxy 0 Posted January 31, 2007 Report Share Posted January 31, 2007 my vr started being jumpy at low revs but above 2k was fine. Then it started running on 5 cyclinders so took it to the garage who changed the plugs. Aparently the plugs are an arse to change. Anyway its running back on all 6 now although its better its still a little jumpy at low revs sometimes but so much smoother and quicker to 4k. However on the bypass home i gave it a little and above 4k its very hesitant and u can feel the car trying to accelerate hard but feels like someones dabbing the brakes, its accelaerates then gets held back etc. the brakes are fine but i cant undetrstand what it is, iv never had anything like this happen before. Any help most appreciated. Also iv seen quite a few bradford members do they have any meets? Link to post Share on other sites
MJ Vr6 79 Posted January 31, 2007 Report Share Posted January 31, 2007 Coxy, Had the same EXACT problem with my car, Change Ht leads, and Coilpack.. 15min job...any probs, give me a holla-07708910402 Link to post Share on other sites
coxy 0 Posted January 31, 2007 Author Report Share Posted January 31, 2007 is that an expensive job? also needs new top mounts, got koni coilovers, whats my best bet for them? thankyou for your help Link to post Share on other sites
MJ Vr6 79 Posted January 31, 2007 Report Share Posted January 31, 2007 £10 for Coilpack £75 for leads. Do it ya self, but when doin the Ht leads,make sure its slotted back into the plug PROPERLY, Vr's are tricky when puttin lead back to plug...Koni coilovers nice ride... Link to post Share on other sites
MJ Vr6 79 Posted January 31, 2007 Report Share Posted January 31, 2007 £120 for coilpack....My number 2 key aint workin properly...LoL Link to post Share on other sites
kalv 0 Posted January 31, 2007 Report Share Posted January 31, 2007 Can he get away with just changing the HT leads for now? Link to post Share on other sites
coxy 0 Posted January 31, 2007 Author Report Share Posted January 31, 2007 bloody hell! things are expensive for the vr especially as they come in 6s! hope this sorts it, was yours quick below 4k but slow above? where you from matey? Link to post Share on other sites
coxy 0 Posted January 31, 2007 Author Report Share Posted January 31, 2007 il do the leads first and see if that cures it. will let you guys know how it goes Link to post Share on other sites
rodney 17 Posted January 31, 2007 Report Share Posted January 31, 2007 get them both m8. if not needed take em back. tends to be coil rather than leads generally in my limited experience..... Link to post Share on other sites
MJ Vr6 79 Posted February 1, 2007 Report Share Posted February 1, 2007 RCF, i agree dude,get them both,try and clean out your throttle body at the same time..... Link to post Share on other sites
coxy 0 Posted February 1, 2007 Author Report Share Posted February 1, 2007 the airflow sensor is making an intermitent ticking noise could that be it? what do i clean the tb out with? just a rag? the garage i took it to were no good, should be sorted by today tho! Link to post Share on other sites
MJ Vr6 79 Posted February 2, 2007 Report Share Posted February 2, 2007 Dude, The sensor wouldnt make a noise, are you chattin bout the Airflow meter,giv me a holla bro-07708910402 Link to post Share on other sites
Recommended Posts