Eat this 2 Posted March 4, 2007 Report Share Posted March 4, 2007 does anybody know if toothed pulley kits/belt are available for a vf supercharged vr6?? Link to post Share on other sites
mk3anni 0 Posted March 4, 2007 Report Share Posted March 4, 2007 WHy dont you just tension the belt properly. Link to post Share on other sites
Eat this 2 Posted March 4, 2007 Author Report Share Posted March 4, 2007 oh go away Link to post Share on other sites
lee060 3 Posted March 5, 2007 Report Share Posted March 5, 2007 might have to be bespoke??? im sure ive said this before , but Z engineering chargers come with toothed belts , maybe fabricate one off a Z to fit a VF ??? Liam Link to post Share on other sites
Eat this 2 Posted March 5, 2007 Author Report Share Posted March 5, 2007 i was under the impression the zr uses the masin serp belth then has an extra cogged belt??vf just runs straight from the ser[ belt id need all the pulley exept maybe the aircon as i think its only thing that runs off the back of the belt Link to post Share on other sites
mk3anni 0 Posted March 5, 2007 Report Share Posted March 5, 2007 oh go awayGet screwed.Your a prick.I managed to tention Jakes belt at the RR day so it didn't slip, just because your incompetent and inept, don't take it out on me. Link to post Share on other sites
VR6Pete 1,455 Posted March 5, 2007 Report Share Posted March 5, 2007 oh go awayGet screwed.Your a prick.I managed to tention Jakes belt at the RR day so it didn't slip' date=' just because your incompetent and inept, don't take it out on me.[/quote']We've had enough Steve.You're Banned, you will be allowed to post in 1 months time. Link to post Share on other sites
lee060 3 Posted March 5, 2007 Report Share Posted March 5, 2007 i was under the impression the zr uses the masin serp belth then has an extra cogged belt??vf just runs straight from the ser[ belt id need all the pulley exept maybe the aircon as i think its only thing that runs off the back of the beltwounder if its too much strain on bearings to extend a pully. then run a toothed belt off that?? Link to post Share on other sites
Eat this 2 Posted March 5, 2007 Author Report Share Posted March 5, 2007 oh go awayGet screwed.Your a prick.I managed to tention Jakes belt at the RR day so it didn't slip' date=' just because your incompetent and inept, don't take it out on me.[/quote']rofl Link to post Share on other sites
Eat this 2 Posted March 5, 2007 Author Report Share Posted March 5, 2007 i was under the impression the zr uses the masin serp belth then has an extra cogged belt??vf just runs straight from the ser[ belt id need all the pulley exept maybe the aircon as i think its only thing that runs off the back of the beltwounder if its too much strain on bearings to extend a pully. then run a toothed belt off that?? not quite with you mate what do you mean by extend the pulley? Link to post Share on other sites
lee060 3 Posted March 5, 2007 Report Share Posted March 5, 2007 maybe i need to take a look at a pic of the belt setup on the charger to confirm my ideas i mean bolting anouther pully(toothed one) onto the end of one of the standard aux pulleys. i could do with looking at a pic to have a little think . to see belt arrangements ect ect . Link to post Share on other sites
Eat this 2 Posted March 6, 2007 Author Report Share Posted March 6, 2007 if you ,ean what i think you do mate the the belt would line up with the other pulleys Link to post Share on other sites
apd 0 Posted March 6, 2007 Report Share Posted March 6, 2007 i dont have any belt slip issues on my 8.5psi set up.but running a 12psi[smaller] i can see where u coming from.does the sc pulley have a wudruff key on it?prob need some sort of arrangement that pulls the belt around more of the sc pulley?if you find a solution eatthis let me know as thinking about going down that route.pm dub 25 whos running a 15psi pulley on a vortech for ideas?? Link to post Share on other sites
Eat this 2 Posted March 6, 2007 Author Report Share Posted March 6, 2007 cheers il do that iv got a new belt waiting to go on il let you know what diffrence that makes Link to post Share on other sites
Recommended Posts