tail light cluster wiring

[Karr-Man 0]

ive just attached some new led light clusters to the back of my mk3 and need some help with wiring

for the nearside cluster there are the following plugs:

8pin

5pin

1pin

for the offside cluster there is just a single 6pin...

so i figure that the wiring goes from the switches thru the near side cluster ending at the offside.

however the new clusters have sockets for the 8pin and 5 pin on the nearside but not one for the 1pin

b4 the change the fog light was on the offside but this no longer works however the nearside fog works instead (so not MOT failure) this would indicate the single pin plug is fog light related.

i was wondering if anyone knew which wire the 1pin wire should connect to to power the offside foglight... also would the increased load of both foglights on the circuit blow any fuses (foglights are now 12 leds each)

can supply photos if required as soon as i locate my camera...:/

thanx

Andy

[sadken 0]

I have a similar query. Why aren't the plugs the same on either side.