jet black vr6 0 Posted March 19, 2007 Report Share Posted March 19, 2007 What all do i need to upgrade to 288mm from mt 280m setup.Any help is welcome. Link to post Share on other sites
swfblade 0 Posted March 20, 2007 Report Share Posted March 20, 2007 I would guess its just Calipers & carriers (plus the obvious disc's).Just done mine actually, tho i went for 312mm setup (uses same calipers as the 288's) so needed a few extra bits, and the difference!! OMG! Link to post Share on other sites
JohnP 0 Posted March 23, 2007 Report Share Posted March 23, 2007 You'll also need new brake hoses, as the connection to the bigger brake calipers are different. Getting the hose off, that's mounted on the inner wing will be difficult, as they usually rusted. Mine was a pain to get off. Link to post Share on other sites
bugsy 0 Posted March 23, 2007 Report Share Posted March 23, 2007 You might need some wheel spacers depending on what wheel you have, mine were catching when fitted , just needed a 3 mm spacer, job done . Link to post Share on other sites
xyber 1 Posted April 9, 2007 Report Share Posted April 9, 2007 Go for the 312mm setup, they pop up on ebay quite often for a decent price Link to post Share on other sites
jet black vr6 0 Posted April 9, 2007 Author Report Share Posted April 9, 2007 Someone mentioned to do this i need spacers, anyone any ideas ? Link to post Share on other sites
Recommended Posts