Rikki 2 Posted April 2, 2007 Report Share Posted April 2, 2007 Just a quickie to try and help me out. On gsf website its saying the inner and outer cv's are the same as the vr6 on gti 8v and 16v so will the complete driveshaft (the long one)fit a VR ??? Link to post Share on other sites
cabrioman 6 Posted April 2, 2007 Report Share Posted April 2, 2007 not to sure all depends on the size of the pline end my 2.0 ones didnt fitt the vr so have to change them around the vr spline was bigger Link to post Share on other sites
richievr 1 Posted April 2, 2007 Report Share Posted April 2, 2007 gti , gti16v and vr ones should all be the same. cabrio ones are different as stated above .. Link to post Share on other sites
Rikki 2 Posted April 3, 2007 Author Report Share Posted April 3, 2007 So just to clarify (sorry aint got money to waste) the long os driveshaft from a gti WILL fit my vr6 ? Link to post Share on other sites
richievr 1 Posted April 4, 2007 Report Share Posted April 4, 2007 ok then..the inner and outer cv's are definately the same. both sides.the n/s shaft has the same part number from gti to vr6 so that is definately the same!!!as for the o/s it is different somehow as it has a different part number. maybe it is a different length as the vr will run a different gearbox?????or maybe the vr one is thicker diameter???? if, going by your name, your vr is supercharged i wouldn't put gti ones on it anyway. Link to post Share on other sites
Rikki 2 Posted April 4, 2007 Author Report Share Posted April 4, 2007 yea maybe your right just cant afford a new one only just replaced the n/s one with a genuine one and want the other side genuine too thanks for your help everyone. "My pic needs updating" Link to post Share on other sites
Recommended Posts