bigvr20 0 Posted April 16, 2007 Report Share Posted April 16, 2007 After noticing that there was oil leaking onto the floor i modifeied my catch can on thurs b4 goin to be maped at stealth last friday, but still after driving the car evan tho the catch can does not return into the system anymore its leaking alot of oil im talking around 8sq inch puddle within the hour after driving!! help please!!! Link to post Share on other sites
rodney 17 Posted April 17, 2007 Report Share Posted April 17, 2007 Not sure on that one! Did you say you had the remap done ? If so Vince would have spotted any install issues! Forgive me as not sure on the routes of things on your install so....The only thing I can think of are:Leak from sump where you connected inMay have a hose not as connected as it should beHave a kink in breather pipes - causing pressureOil level too highBit stumped other than that Sorry! Link to post Share on other sites
cadguy77 0 Posted April 17, 2007 Report Share Posted April 17, 2007 i had a small leak from the oil line going to the charger, might be worth checking that too Link to post Share on other sites
Guest simplyvr6 Posted April 17, 2007 Report Share Posted April 17, 2007 is the oil coming out of the catch tank? if it is sounds like worn rings and high crankcase pressure. Link to post Share on other sites
bigvr20 0 Posted April 19, 2007 Author Report Share Posted April 19, 2007 after speking to vince it seems like it may be an internal problem with the charger Link to post Share on other sites
Recommended Posts