jeggy 0 Posted May 12, 2007 Report Share Posted May 12, 2007 HI there i was wondernig if anyone could help me regarding bleeding the coolant system. my golf currenty has an air lock in the system after changing a heater matrix and have heard slight bubling at times and noticed that fan is on more than i would expect. can anyone tell me how to do this as i want to get it solved quickly so i dont do any head gaskets in or anything like that. your help is appreciated Link to post Share on other sites
cabrioman 6 Posted May 12, 2007 Report Share Posted May 12, 2007 ran the engine with the heaters on red hot adn just let it idle of give it some low revs to get the water flowing as far as i know there aint a bleed screw or anyhting, also take it on a drive but keep a botle of coolant in the car cos the level will drop after drivin .... good luck matey Link to post Share on other sites
jscaml 0 Posted March 29, 2010 Report Share Posted March 29, 2010 Got the same problem, tried bleeding it and more air seems to keep coming out. A little bit of steam came up from by the rad, but i'm not losing water. Also was told that once it's up to temp with the cap off to give it some revs to get the air moving round the system but all that did was make the coolant over flow. all I can hear in the car once i've turned the engine off is water rushing round the heater matrix. Any idea's cuz this is drivin me mad. Link to post Share on other sites
ingham 5 Posted March 29, 2010 Report Share Posted March 29, 2010 you shouldn't have a problem unless aux water pump isn't working, Link to post Share on other sites
jscaml 0 Posted March 29, 2010 Report Share Posted March 29, 2010 Yeah definatley working, wondering if i've got an air leak in the rad what with the bit of steam an all. Does that sound reasonable? Link to post Share on other sites
Recommended Posts