philtvr 0 Posted June 2, 2007 Report Share Posted June 2, 2007 i have a problem the back have gone on fine but the front there is not enough thread to put the nut on whn the from leg is back together. The problem is where the top mount bearing sits on top of the coilover cap. On the VW leg the bearing fits onto the shock shaft on the coliover the bearing sits on top of the aluminium cap this loses about 1 cm of thread which is what i need to put the top nut on. Link to post Share on other sites
craggsy 91 Posted June 2, 2007 Report Share Posted June 2, 2007 wind the coilovers down to give you room at the top, which will mean you will then have to wind em up once top nut is on Link to post Share on other sites
VR6Rich 3 Posted June 2, 2007 Report Share Posted June 2, 2007 Have you got a photo showing the problem with the shock? Link to post Share on other sites
Recommended Posts