takinatrip 0 Posted June 3, 2007 Report Share Posted June 3, 2007 The oil warning light has started flashing and at the same time the rev counter has died.Does anyone know what this points to?Is it a sensor or something on its way out?Ive checked the oil level and thats fine.Any help appreciated 96 VR6 Sharan Link to post Share on other sites
Eat this 2 Posted June 3, 2007 Report Share Posted June 3, 2007 it could be oil pressure too get the pump checked ASAP as a dead pump = dead engine Link to post Share on other sites
xyber 1 Posted June 3, 2007 Report Share Posted June 3, 2007 loose connection / cracked solder on dials? my rev counter went, so i took the whole look out, but found nothing wrong so took it to LUCAS and their electrician found a hairline crack on the solder, so small he found it with a magnifying glass Link to post Share on other sites
takinatrip 0 Posted June 3, 2007 Author Report Share Posted June 3, 2007 just spoke to my mechanic he said that theres also a high possibilty it just needs and oil and filter change as the filter could be blocked and is upsetting the pressure.So thats gonna be my first job.Will post if this sorts it.Heres hoping! Link to post Share on other sites
takinatrip 0 Posted June 4, 2007 Author Report Share Posted June 4, 2007 Ok so Ive just completed an oil and filter change and I still have a flashing oil warning light :-( Next step is to get the oil pressure tested. Is it a straightforward job to change the oil pump? Or does it involve extensive dismantling?Am I best to let the garage do it or tackle it myself?Thanks for the replies so far Link to post Share on other sites
takinatrip 0 Posted June 5, 2007 Author Report Share Posted June 5, 2007 Ok so so far I have done the following:Oil and filter change (nothing)Oil pressure test (nothing) pressure is spot on.Replaced hi and low pressure switches (nothing)I still have a flashing oil lamp and a dead rev counter. :-( Any ideas (m) Ive even tried things like bridging the bonnet switch, as apparently this can sometimes set of the lamp. Link to post Share on other sites
paceo 22 Posted November 5, 2012 Report Share Posted November 5, 2012 this is exactly the same problem i have!! Link to post Share on other sites
Recommended Posts