badboygolfvr6 0 Posted August 13, 2007 Report Share Posted August 13, 2007 Hi, iv been looking around ebay and seen a few vortech superchagers for decent prices. But there are so many different vortech chargers (V1, V2 etc) which one fits the vr6's? and what power gain is expected? also where is the Rotex charger kit available from?thanks Link to post Share on other sites
VR6-DUB 3 Posted February 19, 2011 Report Share Posted February 19, 2011 Yes i will like to get some more information regarding the above too, can someone kindly help out? Link to post Share on other sites
craggsy 91 Posted February 19, 2011 Report Share Posted February 19, 2011 If I ever go supercharged then id go Rorex...........oh hang on I DID go Rotrex lol.Rotrex all the way, much more compact then the others and can run lower boost and still get same figures as the others at higher boost.But im not saying the Vortech or Z-Engineering chargers are anyway worse than the Rotrex, just rotrex are far more effecient Link to post Share on other sites
jims13 6 Posted February 23, 2011 Report Share Posted February 23, 2011 v1/v2 wil make more power at the same boost level as a v9 , but a v9 can be spun quicker , im gonna be running a 2.5 " pulley on my v9 , which we more than likely see me at the limit of the standard internals. a v9f with a 2.5" pulley , should be 10/12 psi . Link to post Share on other sites
Recommended Posts