amazak 3 Posted October 13, 2007 Report Share Posted October 13, 2007 Guy's,Sometimes my LCD mileage clock/display goes wonky, the numbers are broken up and looks distorted. Other times it works fine, do I have to change the entire cluster to solve this or is there an easier fix?PS: It is the display on the left side of the cluster, next to to temp guage.Thanks Link to post Share on other sites
amazak 3 Posted October 20, 2007 Author Report Share Posted October 20, 2007 No one? Link to post Share on other sites
Ben Seabrook 4 Posted November 19, 2007 Report Share Posted November 19, 2007 BUMP - I would be interested to know the answer to this as I have the same problem sometimes and it is really beginning to annoy me :@ do you have to replace the whole LCD display ?? Link to post Share on other sites
thegoth 5 Posted November 19, 2007 Report Share Posted November 19, 2007 My 2Ps worth is that is sounds like a bad / dry joint or cracked PCB track. So the answer is it can be fixed if you can find the problem. Else I believe it is a new cluster job. Link to post Share on other sites
fritzenberg 3 Posted April 26, 2008 Report Share Posted April 26, 2008 who would re-solder the joints,the dealer or a specialist electronics whizz kid? my clock/mfa used to do this now and again,now it's all the bloody time! very annoying! Link to post Share on other sites
Phat VR6 3 Posted April 26, 2008 Report Share Posted April 26, 2008 I wouldn't mess around myself.. Personaly id buy one off ebay Link to post Share on other sites
Bobtrude 0 Posted April 27, 2008 Report Share Posted April 27, 2008 I have the same problem, but only in cold weather. . . . . . .just dont care:)! Link to post Share on other sites
Recommended Posts