Guest vr6ade Posted October 15, 2007 Report Share Posted October 15, 2007 Hi all,I posted this on the electrical problems and although i got a few answers i had no luck.I'm hoping someone can give me a bit of advice. I have a 1994 corrado vr6 and the heater has stopped working. the control for the power of the heater has stopped working. the one with the four speed settings. the temprature one seems to still seems to adjust the heat it just doesn't blow. does anyone know what the problem could be here and how to solve it. The car also seams to be using or losing water, are these issues related. perfect timing for the winter.Help someone please Link to post Share on other sites
craggsy 91 Posted October 15, 2007 Report Share Posted October 15, 2007 To me that sounds like the resistor on the blower has gone. Was a common fault on mk2s so worth a try. Its on bottom of the blower, dont know where the blower is as i have never owned a C Link to post Share on other sites
Guest vr6ade Posted October 16, 2007 Report Share Posted October 16, 2007 anyone know where this resistor is on a corrado? Link to post Share on other sites
latestarter2 0 Posted October 25, 2007 Report Share Posted October 25, 2007 its under the glove box..its a 10min job to change. couple of screws,twist the blower motor and it drops out for you. dead easy. There's a 'how to' on the corrado owners forum. take the passenger shelf off and its in there. Link to post Share on other sites
Mofo 0 Posted February 17, 2022 Report Share Posted February 17, 2022 Hi was wondering if you could tell me was it the resistor that turned out to be the problem? as I have the same problem cheers Link to post Share on other sites
Philly-R6 28 Posted February 18, 2022 Report Share Posted February 18, 2022 If your fan only works on full speed, it is the fuse on the resistor that has blown. Fan speed thermal fuse repair - THE Corrado Forum Knowledge Base (the-corrado.net) Link to post Share on other sites
Recommended Posts