steady 0 Posted January 30, 2008 Report Share Posted January 30, 2008 alright chaps, am new to this site and in need of some desprate advice. i got a 95 vr6 highline with 85 on the clock. driving along yesterday and all of a sudden it wouldnt go into gear, i pushed the clutch down and it stayed down, i could pop it back up but then the same happened again. now theres just nothing there, no resistance, nothing.anyone had this problem or anyone know what it could be,could really do without a new clutch, apparently there big bucks.cheers boys Link to post Share on other sites
steady 0 Posted January 30, 2008 Author Report Share Posted January 30, 2008 really need some help here chaps Link to post Share on other sites
Dave Lea 4 Posted January 30, 2008 Report Share Posted January 30, 2008 slave cylinder on top of the box Link to post Share on other sites
VR6Pete 1,455 Posted January 30, 2008 Report Share Posted January 30, 2008 Presume you've checked your fluid ?sounds very much like the slave cylinder, same happened to mine.pete Link to post Share on other sites
steady 0 Posted January 30, 2008 Author Report Share Posted January 30, 2008 vr6 pete i have checked my fluid and its fine mate,what happened to yours when it went pal, do u mind me asking? Link to post Share on other sites
leespeza123 0 Posted February 2, 2008 Report Share Posted February 2, 2008 check the cable m8 Link to post Share on other sites
dubdub 0 Posted February 2, 2008 Report Share Posted February 2, 2008 I have had this happen and it turned out to be slave cylinder.Ease back the rubber dust cover and check for seepage. If any fluid is present then you have a seal gone or going.A pedal on the floor is a good indication of this fault. Link to post Share on other sites
Phat VR6 3 Posted February 2, 2008 Report Share Posted February 2, 2008 could also be clutch master cylinder Link to post Share on other sites
Recommended Posts