clarkie 1 Posted January 31, 2008 Report Share Posted January 31, 2008 what compression ratio are you force induction junkies using? Link to post Share on other sites
chazrad 16 Posted January 31, 2008 Report Share Posted January 31, 2008 Standard compression (ie no spacer gasket) with Vortech V9F stage 2 kit (8 psi). Good for a reliable 280bhp. I'd fit a spacer if I ever decided to go to stage 3 (12 psi) and a chargecooler or at least intercooler. Link to post Share on other sites
Bobtrude 0 Posted January 31, 2008 Report Share Posted January 31, 2008 Standard 9 psi. Link to post Share on other sites
6potmkII 0 Posted January 31, 2008 Report Share Posted January 31, 2008 9:1 turbo 12psi Link to post Share on other sites
Lizard Racing 0 Posted January 31, 2008 Report Share Posted January 31, 2008 8.7:1 and 22-24PSI Link to post Share on other sites
xyber 1 Posted January 31, 2008 Report Share Posted January 31, 2008 Standard compression (ie no spacer gasket) with Vortech V9F stage 2 kit (8 psi). Good for a reliable 280bhp. I'd fit a spacer if I ever decided to go to stage 3 (12 psi) and a chargecooler or at least intercooler. same, think id only go to stage 2 max and with water injection maybe Link to post Share on other sites
Eat this 2 Posted January 31, 2008 Report Share Posted January 31, 2008 Standard compression (ie no spacer gasket) with Vortech V9F stage 2 kit (8 psi). Good for a reliable 280bhp. I'd fit a spacer if I ever decided to go to stage 3 (12 psi) and a chargecooler or at least intercooler. im running v9 at 12psi no cooler exept water injection stock compression with no probs but wouldnt go any higher Link to post Share on other sites
CorradoVR6-n.o.s 0 Posted January 31, 2008 Report Share Posted January 31, 2008 8:9:1 spacer plate with 14psi + Link to post Share on other sites
MaidenVR6 26 Posted February 2, 2008 Report Share Posted February 2, 2008 8.5:1 C2 spacer and ARP bolts. 20 PSI Link to post Share on other sites
Radostormvr6 2 Posted February 2, 2008 Report Share Posted February 2, 2008 9:1 / S/C 12psi Link to post Share on other sites
FishWick 21 Posted February 6, 2008 Report Share Posted February 6, 2008 8.5:1 forged pistons - 11psi. Link to post Share on other sites
Recommended Posts