Aliando 0 Posted February 15, 2008 Report Share Posted February 15, 2008 can any1 give me instructions on how to fit a bmc cda airbox onto a vr6 golf 1996!? well its actually the cold air feed that we're struggling with!! so any suggestions ppl?? Link to post Share on other sites
binliner 0 Posted February 15, 2008 Report Share Posted February 15, 2008 I thought this had been answered in another post?You need to run it down to the lower air vent in the bumper. To make room to do this you will need to remove the carbon canister (just undo the 2 hoses on the top, block the black one up and leave the clear one open, cable tie them together and tuck them out of the way). You can then run the bmc tube down through the space left by the carbon canister although if you have aircon it will be tight.All this is easier to do with the bumper & probably headlight removed (been about 5 years since I did it!) Link to post Share on other sites
FishWick 21 Posted February 15, 2008 Report Share Posted February 15, 2008 I find the throttle response is better without the cold air hose, but slightly quieter. Link to post Share on other sites
badboygolfvr6 0 Posted February 16, 2008 Report Share Posted February 16, 2008 quiter without the hose? aint it supposed to be louder without the hose Link to post Share on other sites
Recommended Posts