swaper 0 Posted March 12, 2008 Report Share Posted March 12, 2008 Have anyone install DDI instruments ??? pls check the pict., i have some questions ...http://i258.photobucket.com/albums/hh280/swaper/ddi2.jpghttp://i258.photobucket.com/albums/hh280/swaper/ddi1.jpg Link to post Share on other sites
craggsy 91 Posted March 12, 2008 Report Share Posted March 12, 2008 So what are the questions? Link to post Share on other sites
swaper 0 Posted March 13, 2008 Author Report Share Posted March 13, 2008 If you have also turned the digital dispalys in red/black colour, pls tell me how to do it, because my english are not good enough to understand the Canadian instructions !!! I need to know where and how to place the red & transparent pcs of plastics ...... Link to post Share on other sites
craggsy 91 Posted March 13, 2008 Report Share Posted March 13, 2008 If your car has later clocks it isn't possible as displays are part of the board Link to post Share on other sites
swaper 0 Posted March 13, 2008 Author Report Share Posted March 13, 2008 I have already dismount the clocks, but i am not sure about the proper sequence of those red & transparent plastics .... I have 2 red & 1 trans for each clock ....i also cannot understand which OEM trans plastic i have to peel ( take off ) .....Sorry to bother you .... Link to post Share on other sites
VR6Pete 1,455 Posted March 13, 2008 Report Share Posted March 13, 2008 Have you read the DDI fitting instructions?I'm sure it mentions the filters etc... Link to post Share on other sites
andrew mouganie 0 Posted March 13, 2008 Report Share Posted March 13, 2008 when u fit the filters there is a contact strip above and below, make sure u trim the filters enough so they do not overlap the contacts if not they will not display their functions properly Link to post Share on other sites
andrew mouganie 0 Posted March 13, 2008 Report Share Posted March 13, 2008 u are supposed to peel the film of the transparent plastic piece they give you, i used two red ones behind the transparent one. Ok, move the odometer and trip computer and take apart, remember there are 2 contact strips in each, peel off the protective film of the transparent one and place over the lcd screen, this will turn the display black, then place the two red filters behind. Remember make sure u have good contact for the 2 strips above and below the readout u might have to attempt this a few times befor u get it right. Link to post Share on other sites
swaper 0 Posted March 13, 2008 Author Report Share Posted March 13, 2008 Thanks mate .... !! I will try this week end ... Thank you all for your time ... Regards from Greece ! Link to post Share on other sites
Recommended Posts