johnemerson38 1 Posted March 13, 2008 Report Share Posted March 13, 2008 going to change oil,coolant,brake,clutch,gearbox,rear diff,power steering fliuds i want to no what how much each one takes and best place to get them thanks Link to post Share on other sites
cabrioman 6 Posted March 13, 2008 Report Share Posted March 13, 2008 well id say vw all the way then ur covered as u dont know how other oils and fliuds will react ...engine oil is about 5.5 ltrcoolant is a 50/50 mix of water and G ?? the pink stuff from vw sorry forgot wot it is brake and clutch fluid is the same and max 2 ltr if bleed correctlygearbox think about 3 ltr ??!!rear diff ... only if its a syncro and cant be any more than 2 or 3 ltrpas fluid is the green one from vw and same about 1.5 - 2 ltr hope this helps ..... oh and just askin but y u wanna change all teh fluids ?? Link to post Share on other sites
johnemerson38 1 Posted March 14, 2008 Author Report Share Posted March 14, 2008 just its been sat for a while so wanna give it a really good service changing all the pads and discs also filters Link to post Share on other sites
johnemerson38 1 Posted March 15, 2008 Author Report Share Posted March 15, 2008 hiya got myself 2 bottles of g12 plus and 5 ltrs of quantum synta 10w-40 in a silver bottle is that the right oil it just says synthetic i thought vr's were semi.also the rear diff is 0.7ltrs and the gearbox 2.4ltrs from what i gather but what type to get any help Link to post Share on other sites
xyber 1 Posted March 15, 2008 Report Share Posted March 15, 2008 thats the right oil, but you need another 500mlbloody VRs! haha Link to post Share on other sites
johnemerson38 1 Posted March 15, 2008 Author Report Share Posted March 15, 2008 i asked the guy he said that one bottle will do cant get onther 500ml till monday when parts are open :@ Link to post Share on other sites
xyber 1 Posted March 15, 2008 Report Share Posted March 15, 2008 this is quite useful matehttp://www.vr6oc.com/guides/pdf/gv_aaa_vr6_92-97.pdf Link to post Share on other sites
johnemerson38 1 Posted March 15, 2008 Author Report Share Posted March 15, 2008 also i am going to change my slave clutch cylinder how do i change the fliud for that i no that the slave has a bleed nipple do i just loosen that and do i need a special tools Link to post Share on other sites
Recommended Posts