kie_dub 0 Posted March 17, 2008 Report Share Posted March 17, 2008 Firstly hello to everyone!! this is my first post on the site and im glad i signed up!!Ive got a '94 vr6 which i bought from down south yesturday, i noticed when buying that the car seems to be mis-firing and hesitant at low revs :s the seller did point this out to me and said ht leads are murder for going on vr6's and he changed them every 5,000 miles. Showing off my nice shiny engine bay to my mates tonight and noticed a spark every say 5 seconds or there abouts on the top on the engine coming from where the ht lead enters the top of the engine. What is this due to? Cheers Link to post Share on other sites
ric_vr6 0 Posted March 17, 2008 Report Share Posted March 17, 2008 Check the leads and make sure you aint got any cracks/splits in them.Then you could try pulling the leads out 1 at a time (then replacing so engine dont cut out) and when the spark stops`s, chances are its rhat lead mate. Link to post Share on other sites
VWvince 0 Posted March 18, 2008 Report Share Posted March 18, 2008 You will probably have to change your spark plug wires...buy BREMI wires it is pretty good Link to post Share on other sites
kie_dub 0 Posted March 20, 2008 Author Report Share Posted March 20, 2008 Hurts like a biiiiaatcchh touching them leads whilst engine is running lol! My mate put insolation tape round the lead for a temporary fix, seems to be fine now. Went into DUbsport in wigan to see about those megnacore ht leads but he said the standard ones work just as well Link to post Share on other sites
VR6BOY 2 Posted March 20, 2008 Report Share Posted March 20, 2008 OEM leads work the best IMHO 25k on my highline and still going : ) Link to post Share on other sites
Recommended Posts