cabrioman 6 Posted April 22, 2008 Report Share Posted April 22, 2008 just had my cabrio mapped @ perfect touch made 244.2 bhp and 221.7 lbft at crank ..now that seams a bit low to me .... i got a stage two v9 charger, flowed head, 2.5 inc exhaust, de cat, 8.5 mm leads, bosch plugs, K and N filter !!! does that seam low to anyone else ??tony Link to post Share on other sites
turbo_ted 0 Posted April 22, 2008 Report Share Posted April 22, 2008 does seem low, but depends how accrute their rolloers are.Mines stage 2, eveything else standard, even still running the cat, and it made 281bhp, mapped at stealth. Link to post Share on other sites
cabrioman 6 Posted April 22, 2008 Author Report Share Posted April 22, 2008 hmmmm have a made feelin i took it to the wrong place !!!! Link to post Share on other sites
xyber 1 Posted April 22, 2008 Report Share Posted April 22, 2008 V9 stage 1, 2.5 inch exhaust with standard cat, mapped at stealth260.7bhp Link to post Share on other sites
mike 6 Posted April 23, 2008 Report Share Posted April 23, 2008 does seem slightly low for spec, take it back and complain? Link to post Share on other sites
UnitedMotorsport 55 Posted April 23, 2008 Report Share Posted April 23, 2008 What boost is it running? Link to post Share on other sites
VR6Pete 1,455 Posted April 23, 2008 Report Share Posted April 23, 2008 What BHP was it before you remapped the car? Link to post Share on other sites
cabrioman 6 Posted April 23, 2008 Author Report Share Posted April 23, 2008 its 8 psi boost and was 177.6 before map and charger ..... its also got a miss fire under boost and some times stalls on when comin off power and on to clutch ie at lights .... not a happy bunni Link to post Share on other sites
UnitedMotorsport 55 Posted April 23, 2008 Report Share Posted April 23, 2008 Did you get a rolling road print out afterwards? If so can you post it, and the AFR chart to go with it? Link to post Share on other sites
cabrioman 6 Posted April 23, 2008 Author Report Share Posted April 23, 2008 only got the 2nd run print out aint got AFR chart ill get them up tonite hope fully Link to post Share on other sites
UnitedMotorsport 55 Posted April 23, 2008 Report Share Posted April 23, 2008 Ideally you need to get a plot of AFR to see whats going on. Have you run VAG-COM on the car, if so is there any errors? Link to post Share on other sites
cabrioman 6 Posted April 23, 2008 Author Report Share Posted April 23, 2008 rite no errors in the engine ecm ..... but no AFR plot but here is the bhp and torque plot (hope fully) lol Link to post Share on other sites
cabrioman 6 Posted April 23, 2008 Author Report Share Posted April 23, 2008 rite cant seam to get the chart up ... but it stil dont seam enough to me only 244 bhp when ted got 280 bhp on a standard engine and exhaust etc .... wot should a stage two 8 pis v9 put out on a obd 1 ??? Link to post Share on other sites
Phat VR6 3 Posted April 23, 2008 Report Share Posted April 23, 2008 Standard compression with make more power... if your runnin low compression will be alittle lower but saferIts not belt slip is it?> Link to post Share on other sites
Eat this 2 Posted April 23, 2008 Report Share Posted April 23, 2008 have you got a boost gauge mate? (belt slip will show up)id be VERY wary of driving it with them figures somethins a long way from being right youv no idea whats goin on with the fuelling could be seriously lean or rich (lean will melt pistons etc rich will cause black smoke and clogged plugs which in turn will cause a missfire Link to post Share on other sites
cabrioman 6 Posted April 24, 2008 Author Report Share Posted April 24, 2008 runnin standard compression , im sure its not belt slip .... got some single pin plugs that im goin to gap to 0.7mm and go from there ... called perfect touch today and they say the most im goin to get from a charged vr6 is about 260-270 bhp ?? and they think all the readings from stealth are wrong and their rollers must be out !!! Link to post Share on other sites
jesterwalker69 0 Posted April 24, 2008 Report Share Posted April 24, 2008 Sounds a bit worrying matey, hope it all gets sorted out soon enough. It must be killing you having a charged VR that isn't working properly Link to post Share on other sites
cabrioman 6 Posted April 24, 2008 Author Report Share Posted April 24, 2008 u dont know the half of it mate lol Link to post Share on other sites
wayne_1@tiscali.co.uk 27 Posted April 24, 2008 Report Share Posted April 24, 2008 its def the place u took it to that was my charger i sold u when i had stage 2 i was pushing 285bhp and everything else was standard and that was vince at stealth that mapped it Link to post Share on other sites
hvr6 88 Posted April 24, 2008 Report Share Posted April 24, 2008 What can you do Tony, sounds like a nightmare? Can you get a 2nd opinion? Expensive mistake they've made :-( was looking forward to hearing that s/c noise Link to post Share on other sites
cabrioman 6 Posted April 24, 2008 Author Report Share Posted April 24, 2008 dont worrie u will be hearin the s/c noise very soon hope fully ... got a few tricks up my sleve ... like tellin them i want my money back and then takin it to vince like i should have done in the first place ... Link to post Share on other sites
xyber 1 Posted April 24, 2008 Report Share Posted April 24, 2008 bit cheeky of them to say Stealth are wrong when they are blatantly very well proven Link to post Share on other sites
cabrioman 6 Posted April 24, 2008 Author Report Share Posted April 24, 2008 cheers for that dub 25 i now know it is perfect touch that havent done it correctly .... looks like money back time Link to post Share on other sites
Eat this 2 Posted April 24, 2008 Report Share Posted April 24, 2008 runnin standard compression ' date=' im sure its not belt slip .... got some single pin plugs that im goin to gap to 0.7mm and go from there ... called perfect touch today and they say the most im goin to get from a charged vr6 is about 260-270 bhp ?? and they think all the readings from stealth are wrong and their rollers must be out !!![/quote']theyr talkin out there arse mate you know mines higher than that and theres a guy runnin 400 hp with a rotrex Link to post Share on other sites
cabrioman 6 Posted April 24, 2008 Author Report Share Posted April 24, 2008 well im want my money back now but off to new york in the morin so will have to wait till early next week ..... Link to post Share on other sites
Recommended Posts