warnerp060869 0 Posted August 4, 2008 Report Share Posted August 4, 2008 Hiya,Can anyone please tell me what might be causing the standard suspension on my VR6 to be 395mm high on the nearside and 370mm on the offside *-) I understand from an earlier post that it should be 340mm as standard...Looking under the bonnet there is a gap which is well over 10mm between the turret and the metal plate at the top of the suspension, I don't know if that's anything to do with it? I didn't think the standard suspension was adjustable in anyway :|I am due to go on my hols in the car in a couple of weeks so I need to get this sorted or my Girlfriends going to kill me CheersPaul Link to post Share on other sites
Phat VR6 3 Posted August 4, 2008 Report Share Posted August 4, 2008 snapped spring? or top mount been put on upside down? Link to post Share on other sites
warnerp060869 0 Posted August 4, 2008 Author Report Share Posted August 4, 2008 Groan ...Fingers crossed its option number 2 then!Cheers Link to post Share on other sites
Whytee 0 Posted March 5, 2009 Report Share Posted March 5, 2009 I have the same problem with mine, did you ever find out which one it was? Link to post Share on other sites
warnerp060869 0 Posted March 5, 2009 Author Report Share Posted March 5, 2009 Hiya,Yes, the n/s/f spring wasn't seated correctly. Paul at The Phirm persuaded it in with a sizeable hammer and that was it, job done Hope that helps.Paul Link to post Share on other sites
Recommended Posts