mike_VR6 0 Posted December 4, 2008 Report Share Posted December 4, 2008 Hi all, I have a Pioneer avh-p5700dvd H/U and there is a s**t load of wiring that goes along with it. Is there any way of fitting it all behind or do i have to take the dash apart..if so how??? any help would be greatMike Link to post Share on other sites
xyber 1 Posted December 4, 2008 Report Share Posted December 4, 2008 easiest way, remove the ash tray, and plastic facia of heater dials with flat screwdriver, remove the 4 screws behind facia and 2 behind ash trayyou can then slide the bottom panel out and the control knobs downwards, which gives you loads of room to feed everything down out the waybe careful though as the plastics can be brittle, but its literally a 20-30 min job Link to post Share on other sites
mike_VR6 0 Posted December 4, 2008 Author Report Share Posted December 4, 2008 beautiful mate, cheers! Link to post Share on other sites
slim5878 1 Posted December 4, 2008 Report Share Posted December 4, 2008 take the lower glove box and pax air bag out and pull the looms back if you do this way its harder for some little teeif to rip it out but you have to take the car apart to remove the head unit Link to post Share on other sites
vw_golf_vr6 0 Posted February 6, 2009 Report Share Posted February 6, 2009 take the lower glove box and pax air bag out and pull the looms back if you do this way its harder for some little teeif to rip it out but you have to take the car apart to remove the head unityea thats how i did mine, i got a sony mask head unit Link to post Share on other sites
Recommended Posts