Chris_B 0 Posted December 21, 2008 Report Share Posted December 21, 2008 Hi folks, I've put a vr6 into my mk3 gti, now it wont start, so i got a vag-com thing off the internet, but now ive found out that it aint the full version and dont know what the codes mean. Could anyone shed some light on this? Any help on what the faults are and how to fix them is greatly appreciated. The ignition lights come on, the fuel pump primes, and I can hear some sort of electrical buzzing coming from the engine bay, but it just wont fire up. This is what the vag-com says...VAG-COM Version: Release 409.1-USChassis Type: 1H - VW G/J/V Mk3Scan: 01,02,03,08,15,25,56-------------------------------------------------------------------------------Address 01: Engine Controller: 021 906 256 Component: MOTRONIC M3.8.1 AT V04 Coding: 00001 Shop #: WSC 013173 Faults Found:00668 - Supply Voltage Terminal 30 07-00 - Signal too Low00553 - Shareware Version. To Decode all DTCs 31-10 - Please Register/Activate - Intermittent17978 - Shareware Version. To Decode all DTCs P1570 - 35-00 - Please Register/ActivateReadiness: N/A-------------------------------------------------------------------------------Address 03: ABS Brakes Controller: 3A0 907 379 Component: ABS ITTAE 20 GI V00 Coding: 03604 Shop #: WSC 000003 Faults Found:00283 - Front Left ABS Wheel Speed Sensor (G47) 35-10 - - - Intermittent00283 - Shareware Version. To Decode all DTCs 16-10 - Please Register/Activate - Intermittent00285 - Shareware Version. To Decode all DTCs 35-10 - Please Register/Activate - Intermittent Link to post Share on other sites
Recommended Posts