vrburt 0 Posted January 25, 2009 Report Share Posted January 25, 2009 Seeing as the weather was nice yesterday i thought id stick some bits on the car.Here it is beforeAnd after The fogs are the next to be changed.(smoked also) Im going to lower it but how much im not sure of yet. Maybe 40mm Link to post Share on other sites
cabrioman 6 Posted January 25, 2009 Report Share Posted January 25, 2009 looks good so far ... u goin to do the rear wheels aswell ?? lol Link to post Share on other sites
VDub_Steve 1 Posted January 25, 2009 Report Share Posted January 25, 2009 lol i just noticed that as for lowering it deck it with coilovers Link to post Share on other sites
amazak 3 Posted January 25, 2009 Report Share Posted January 25, 2009 Looks good, 40mm is great for daily use. You can also smoke the original fogs and indicators but I must admit they don't look as good as the aftermarket clear smoked units. Link to post Share on other sites
vrburt 0 Posted January 25, 2009 Author Report Share Posted January 25, 2009 looks good so far ... u goin to do the rear wheels aswell ?? lollol. I took the wheel off. It was just so see how it sits. Any suggestions on suspension manufactures ? I think 40mm sound good as it will be a daily Link to post Share on other sites
VDub_Steve 1 Posted January 25, 2009 Report Share Posted January 25, 2009 40mm will be fine but tbh you are probably better off gettin coilovers so then u can choose the height thats right for you!! As for the makes it depends how much you wanna spend??? Link to post Share on other sites
mike 6 Posted January 25, 2009 Report Share Posted January 25, 2009 looks nice mate, twin headlights are rarely seen these days, .. do u have a full set of those rims waiting to go on? Link to post Share on other sites
vrburt 0 Posted January 26, 2009 Author Report Share Posted January 26, 2009 Yeah full set. The rim are Lenso bsx. 16x 7.5 / 5x100 Link to post Share on other sites
VRDan 0 Posted February 8, 2009 Report Share Posted February 8, 2009 Hey man sweet wheels im thinking of gettin a set myselfwhere did you get em from? most i find use a 4x100, PCD 5x100 seem a bit rare are you using spacers. Link to post Share on other sites
mike 6 Posted February 10, 2009 Report Share Posted February 10, 2009 Hey man sweet wheels im thinking of gettin a set myselfwhere did you get em from? most i find use a 4x100' date=' PCD 5x100 seem a bit rare are you using spacers.[/quote']they sell them here http://www.potn.co.uk/p1012150.htm Link to post Share on other sites
Damo 85 0 Posted February 11, 2009 Report Share Posted February 11, 2009 Wheels look very nice mate.. any side on shots? also what tyre size did you go for? I'll be looking at the same set but all silver, prob next couple of months Link to post Share on other sites
vrburt 0 Posted February 11, 2009 Author Report Share Posted February 11, 2009 I got these from rimstyle. (PVW mag) It was a wheel n tyre package with new bolts and locks/ Centre cap/ removal tool. Balanced and posted £620. I spoke to a guy over the phone. Told him what wheels i wanted size and what car they were for. He mentioned ET35. (Which means nothing to me *-) ???) But assured me i would not need spacers.I only put one wheel on to make sure it cleared the caliper and turned full lock. So this is the only side view. Just got to sort out some suspension now The tyres are 195/45/16 Link to post Share on other sites
Damo 85 0 Posted February 12, 2009 Report Share Posted February 12, 2009 LOL exacty where I had seen em too. Nice to actually see them on the car. that will look sweeeet once its lowered! cheers for the heads up on ordering them too! Link to post Share on other sites
vrburt 0 Posted February 15, 2009 Author Report Share Posted February 15, 2009 Fogs courtesy of cabrioman cheers mate Picked up a group n rally exhaust system last week. so got to fit that at some stage. Lower it next month. Then put it back on the road. Im starting to miss the roar (6) Link to post Share on other sites
cabrioman 6 Posted February 15, 2009 Report Share Posted February 15, 2009 no worries fella looking good they look gooooood Link to post Share on other sites
nivag27 5 Posted February 15, 2009 Report Share Posted February 15, 2009 Nice work mate, I have got koni adjustables onb mine which lowers it about 40mm and you can adjust the stiffness. Link to post Share on other sites
amazak 3 Posted February 15, 2009 Report Share Posted February 15, 2009 Nice work mate' date=' I have got koni adjustables onb mine which lowers it about 40mm and you can adjust the stiffness.[/quote']I would go with Koni's, don't be Jamex or any other cheap kits like I did , the ride is shite, even the cheap coilies are a bit harsh. Car is looking good, very nice wheel Link to post Share on other sites
mike 6 Posted February 15, 2009 Report Share Posted February 15, 2009 deffo a good choice in wheel mate,pretty much a bbs rs replica, i like Link to post Share on other sites
g60bron 0 Posted February 16, 2009 Report Share Posted February 16, 2009 Get a set of Weitec GTN Coilovers... Fronts are coilies and rears are adjustable platforms...they retail for £300 and are mint! Link to post Share on other sites
amazak 3 Posted April 24, 2009 Report Share Posted April 24, 2009 Hey bro,Have you had te wheels fitted and any pics Link to post Share on other sites
vrburt 0 Posted April 28, 2009 Author Report Share Posted April 28, 2009 Hey bro' date='Have you had te wheels fitted and any pics [/quote']There on but i havent taken any pic's yet. Next time i get it out of the garage for a run il take some an post em up. Link to post Share on other sites
vrburt 0 Posted May 23, 2009 Author Report Share Posted May 23, 2009 As requested. Not a very good pic. Took it on the phone and the light was fading. But you get the idea. Link to post Share on other sites
amazak 3 Posted May 23, 2009 Report Share Posted May 23, 2009 Bro you need to slam it quick, perfect tyre size on 16's and it can go way down But looking smashing! Link to post Share on other sites
DanH 1 Posted May 26, 2009 Report Share Posted May 26, 2009 very nice, clean!! def get it lower tho! Link to post Share on other sites
fuzzwaldo 1 Posted June 3, 2009 Report Share Posted June 3, 2009 hiwhat twin headlight are you usingthanks Link to post Share on other sites
Recommended Posts