vento-rob 0 Posted January 26, 2009 Report Share Posted January 26, 2009 hello alljust bought myself a 93 vento vr6 and the old temp guage is not working (dosnt move an inch lol) any ideas what this could be.Ta Robalso it may be connected bu my speedo dose not work either. Any ideas? Link to post Share on other sites
cabrioman 6 Posted January 26, 2009 Report Share Posted January 26, 2009 does anything else not work on the dash ... check the plug on the back Link to post Share on other sites
Guest Nero1701 Posted January 26, 2009 Report Share Posted January 26, 2009 effin hell mate, your maf!!!your temp gauge, speedo!! anythin else you wann get of your chest? Link to post Share on other sites
vento-rob 0 Posted January 26, 2009 Author Report Share Posted January 26, 2009 pmsl well i have this burning sensation............... sorry wrong forum.the rev counter clocks and multi display all work fine just the temp guage and speedo aint working.Rob Link to post Share on other sites
vento-rob 0 Posted January 29, 2009 Author Report Share Posted January 29, 2009 bumpety bump anyone else got a clue Link to post Share on other sites
vrclaire 0 Posted January 30, 2009 Report Share Posted January 30, 2009 I have just had the same problem on my mk3 Vr, my temp gauge not working after testing it with the multi meter,it was working fine up to the loom in the dash! so I took the clocks out and JUST changed the TEMP Guage from another golf in the scrap yard, and now it works again. I even changed my Engine wiring Loom because i thought it was that.hope this helps?....Claire Link to post Share on other sites
vento-rob 0 Posted February 1, 2009 Author Report Share Posted February 1, 2009 Claire your greeeaaatttttt!!!!!!illo give that go. Link to post Share on other sites
Recommended Posts