Bampson 0 Posted November 3, 2004 Report Share Posted November 3, 2004 Yes boys and girls those of you who have been watching channel Bampson know that the plan was to swap a knackered obd1 engine and retro fit a obd2 engine, and at the same time changing from auto to manual.. Well after lots of assing around Frankenstein has breathed life.. !amazed The problem I still have is that the ECU needs to be tricked into thinking that the car is in park . %-6 That means attaching the old auto gear stick (just to the wiring) and a module from the auto box had to be taken out and attached to the wiring.The question is does any one know how to bypass both of these items? And does any one have a wiring diagram that covers the automatic module?any help would be appreciated....Pic of the gearbox module Link to post Share on other sites
Eat this 2 Posted November 3, 2004 Report Share Posted November 3, 2004 cant u get/fit an ecu from a manual? Link to post Share on other sites
Bampson 0 Posted November 3, 2004 Author Report Share Posted November 3, 2004 i have thought of that but the wiring will still be sending signals/curent to the auto module under the seat .. and i'm not sure if it might damage the new ecu .. Link to post Share on other sites
VR6Rich 3 Posted November 3, 2004 Report Share Posted November 3, 2004 Did you talk to Vince about this m8?P.S. Hope you liked the manifold. :-)[ Edited Wed Nov 03 2004, 08:25PM ] Link to post Share on other sites
Bampson 0 Posted November 3, 2004 Author Report Share Posted November 3, 2004 thank rich i'm chuffed to bits with the manifold .. as soon as the car is running properley i will be fitting it ..i tried to talk to vince but he was busy so i didn't get a chance to pick his brain .. Link to post Share on other sites
VR6Rich 3 Posted November 3, 2004 Report Share Posted November 3, 2004 Give him a phone call m8, hes the kind of guy that will spend time on the phone with you to help you. Link to post Share on other sites
Recommended Posts