Rolling Road Day near duxford (cambridge) 19th Sep 09

[cabrioman 6]

cheers for top day once again brett ... one broke one thing but nothing serious lol ... good to see everyone always ...

194 bhp engine power

147 bhp @ the wheels @ 6180 rpm

163 lbf-ft @ 6080 rpm

[thegoth 5]

Cheers for organising it Brett. Appreciate your and Richard's attention to detail and the feedback given to all owners.

Was due to put the 16ver back on the road anyway so it can be a leisurly diagnosis.

Many thanks to Dave for use of the ECU - how lucky was that - and Roger for the tow home.

[BADOIR 2]

sounbs like you broke the vr nige hope its not serious mate, good luck bud.

194 ehTony, ?? good start mate, i'm sure that figure will be higher soon lol,

[thegoth 5]

sounbs like you broke the vr nige hope its not serious mate' date=' good luck bud.

[/quote']

Died after I put my Ebay chip in - was after a difinitive answer - so relieved Dave has a dizzy engine so I could rule out the ECU which worked on his whist his ECU made no difference to mine. Hope the weather stays dry so I can set to work with a multimeter as it looks like a short / earth problem.

[VR6Nat 9]

just got home a little while ago. Great day guys. Shame i couldn't run my car but will get it done in the next week or two hopefully. I will post all the pics up on here on monday. Fingers crossed nige gets his sorted... But thanks to everyone there, was a good one! :)

[vr-koj 0]

Was good to meet a few more faces today ' relatively' happy with the result, though surprised at the tranny / drag loss figure, a whopping 58 bhp :-( . Never mind, at least no faults or issues came up...

199.5 bhp @ 6040 rpm

181 lb ft @ 5040 rpm

Air temp 27 degrees

C y'all again,

Good luck Nige n Chris, get rolling soon !!

[hvr6 88]

Thanks for organising today Brett had a really good day :-) pleased with my results and great to see everyone again, hope you get you car sorted soon Nige

188hp engine power

136hp @ the wheels @ 6260 rpm

176lbf-ft @ 5250 rpm

[thegoth 5]

Guess I shoud 'fess up to the NA wooden spoon.

Wheel Power (doesn't sound as bad): 123.5bhp @ 5880 rpm -

Torque : 157 lbl-ft @ 4070 rpm

[craggsy 91]

Well always a pleasure people

BHP unreadable

Torque Off the scale

Thanks Tony for gauge holder

And Helen for the inlet manifold

[ventovr6essex1 0]

Well always a pleasure people

BHP unreadable

Torque Off the scale

Thanks Tony for gauge holder

And Helen for the inlet manifold

let us know when u got all your bits on and i will book u in i will have a word with richard see if i can get u some discounted roller time when i get back from holiday . im glad that we didnt run it and more so we potentially stopped an expencive engine failure .

[nivag27 5]

Just got back, cars not as quick as it used to be lol,

179 BHP engine :-(

134.5 @ wheels

164 1bf-ft @4200rpm

Let me know when you can squeze me in Tony and I will pop over,

Well great to see everyone again, thanks to Brett and revivals, Helen for the sandwich run and everyone for the day, hoope to see ya'll @ night racing

[craggsy 91]

So whens your holiday then Brett so I know when to kinda ready. Missing injectors have been posted, so will get em off for cleaning straight away, standard inlet manifold is ready to go on along with a new rising rate fpr. Gonna ring up about a uprated fuel pump monday as well to make sure everything is covered.

Cheers once again Brett

[BADOIR 2]

So whens your holiday then Brett so I know when to kinda ready. Missing injectors have been posted' date=' so will get em off for cleaning straight away, standard inlet manifold is ready to go on along with a new rising rate fpr. Gonna ring up about a uprated fuel pump monday as well to make sure everything is covered.

Cheers once again Brett

[/quote']

give ya £50.00 for the battered old schrick lol :-p

[craggsy 91]

So whens your holiday then Brett so I know when to kinda ready. Missing injectors have been posted' date=' so will get em off for cleaning straight away, standard inlet manifold is ready to go on along with a new rising rate fpr. Gonna ring up about a uprated fuel pump monday as well to make sure everything is covered.

Cheers once again Brett

[/quote']

give ya £50.00 for the battered old schrick lol :-p

Deal...........when would I get the other £700......a week later?

[jims13 6]

craig if you want a hand fitting it all.. we can always book it in at revials and fit it all the day before

[craggsy 91]

Jim fitting is the easy bit.....gotta get injectors cleaned before it all goes in. Then I'll book it in if you wanna come over when i book it in then do so mate, always good advice from you.

So much to get in and sorted before i go tho

[craggsy 91]

The more I think about it the more I think its the injectors, just not able to flow enough as standards are 205cc

[BADOIR 2]

So whens your holiday then Brett so I know when to kinda ready. Missing injectors have been posted' date=' so will get em off for cleaning straight away, standard inlet manifold is ready to go on along with a new rising rate fpr. Gonna ring up about a uprated fuel pump monday as well to make sure everything is covered.

Cheers once again Brett

[/quote']

give ya £50.00 for the battered old schrick lol :-p

Deal...........when would I get the other £700......a week later?

its the only one i know with stonechips lol 8-|

[CALICO 130]

Thanks to Brett and all at Revivals

Excellent day good to see people laugh at my engine trying to escape on rev limiter lol

Thanks for making me scare Chris trying to keep up

197bhp

175lb-ft@4800rpm

129.5bhp@wheels

Hope you find the problem soon Nige

Good luck with your wishbones Nat

May the ForceD be with you Craig

[jims13 6]

good day guys, sorry i couldnt stay to the end. craig, its more than liklely your fuel pump, as it ws dropping 2 bar on full throttle, your injectors would be maxed out anyways.. and with the rising rate, it just forces fuel through them instead of letting it return to the tank.. but best to change it all over if you have the bits.. let me know when and illl pop over.

[Ben Seabrook 4]

wow sounds like it was an eventful day !!! really gutted I couldn't make it over

[cabrioman 6]

there is always next time ben and im sure that wont be to far into next year lol

[hvr6 88]

some pics

[hvr6 88]

..

Tonys new hack

poor Nat's face when her baby went on the rollers... soon to come off again least the problem has been diagnosed :-)

[hvr6 88]

..