UKG Grant 1 Posted June 20, 2009 Report Share Posted June 20, 2009 hey, my knowledge of vr6 engines isn't so great at the moment so iv got a couple of possible silly questionsi need to get hold of thee aux water up for a corrado vr, however no breakers seems to have one of a 2.9.so are they the same including fittings etc as the golf vr? so could I intact use one from a 2.8?if so, I'm not fully sure if the raddos went obd1 and obd2? i have a k reg raddo so I'm not sure which one i would need? or even if it makes a difference thanks in advanceGrant Link to post Share on other sites
thegoth 5 Posted June 20, 2009 Report Share Posted June 20, 2009 afaik the aux pump is the same for all 12V vr6 engines regardless of size/age.the corrado 2.9 only ever came in obd1 Link to post Share on other sites
UKG Grant 1 Posted June 20, 2009 Author Report Share Posted June 20, 2009 excellent, so providing i get a aux pump from a obd1 it will be finecheers!Grant Link to post Share on other sites
thegoth 5 Posted June 20, 2009 Report Share Posted June 20, 2009 or even an OBD2 Link to post Share on other sites
BADOIR 2 Posted June 21, 2009 Report Share Posted June 21, 2009 http://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?296171 Link to post Share on other sites
UKG Grant 1 Posted June 23, 2009 Author Report Share Posted June 23, 2009 just some more silly questions regarding the pump, does it run constantly? or only once the engine is turned off? and is it on the passenger side of the engine at the top on the back? i assume it is the pump thats coursing the noise just like a buzzing/slight grind ish type noise if that makes sense? Link to post Share on other sites
thegoth 5 Posted June 23, 2009 Report Share Posted June 23, 2009 it should start when the ignition is one. it also runs for a while once the engine and ignition is off until the temp drops. buzzing is normal and gurgling is common, Link to post Share on other sites
Recommended Posts