mriley60 0 Posted June 20, 2009 Report Share Posted June 20, 2009 hello all, currently have standard BBS rims on my VR6, its currently lowered around 65mm (not my choice), I have ordered some new shocks and springs for it (around 25mm drop, plus uprated topmounts, so around 35mm in total), will 16s be ok without rubbing? Going to go for a set of splits, gloss black with polished outer. Should look good. Anyone any hassles running this setup, the car is my daily driver;.CheersMartin Link to post Share on other sites
craggsy 91 Posted June 20, 2009 Report Share Posted June 20, 2009 I have removed your other post asking for advice in the market place Link to post Share on other sites
craggsy 91 Posted June 20, 2009 Report Share Posted June 20, 2009 Shouldnt rub with 16s as long as you run 195/45 tyres. I run 16s and a lot lower than that and have no problems.But running the splits we would need to know ofsets and widths to tell you for sure Link to post Share on other sites
mriley60 0 Posted June 21, 2009 Author Report Share Posted June 21, 2009 splits will have to wait a year or so (got to do head gasket now), a set of 16" Lenso BSX 16s have come up with 195/45s on, ET25 offset. Will these be ok? Link to post Share on other sites
Recommended Posts