crackbaby 0 Posted November 18, 2004 Report Share Posted November 18, 2004 Hi there.Got a 92 vr6 golf wid the standard 7/15 rims on at the mo. Found some real nice rims but aint too sure about the offset. The rims are 7.5/17''/30 will these fit? and does anyone know what the standard offset is?Thanks Link to post Share on other sites
Guest Olly_K Posted November 18, 2004 Report Share Posted November 18, 2004 ET35 is standard i believeyou might get away with 30, but put the wheels on if you can and check for rubbing Link to post Share on other sites
acf8181 0 Posted November 18, 2004 Report Share Posted November 18, 2004 don't forget PCD (gap between wheel nuts), has to be 5 x 100mm for vr's.and centre bore, not sure what it is but its critical on vw's. Link to post Share on other sites
DundeeDub 0 Posted November 19, 2004 Report Share Posted November 19, 2004 is the standard offset not et 43 ??? and is the standard wheel width not 6.5 inchesi know et 35 and et 32 fit ok if running 205x40 tyreset 30 i don't know, but you can always try and if it doesn't work then sell them, it will also depend just how low your car is if it is at all Link to post Share on other sites
Scotty 0 Posted November 19, 2004 Report Share Posted November 19, 2004 Im sure my rims are et 30 Link to post Share on other sites
DundeeDub 0 Posted November 19, 2004 Report Share Posted November 19, 2004 i know my tt ones are et 32 Link to post Share on other sites
Recommended Posts