dkingvr6 0 Posted July 2, 2009 Report Share Posted July 2, 2009 Hello,Just got a highline VR6 1995 plate has no plastic trim so assumed it was OBD2, just started poking about at everything (as its going to Nurburg this month and then a few track days back home), and noticed that the engine is definitely OBD1 but the braking system is OBD2 i.e. discs 288mm and later ABS unit.Has this been noted on the any other cars? dont want to think that some ones done an engine swap!Also then should i be using Vagcom to cycle the ABS unit when i change the brake fluid? (strictly not an engine question, but didnt want to duplicate threads)Cheers Dan Link to post Share on other sites
Ben Seabrook 4 Posted July 2, 2009 Report Share Posted July 2, 2009 yeah the 95 cars mate ( and others) can have bits from both on them it's only the engine that determines obd1 or 2 mate mine is 1 but as an obd2 maf and other bits and bobs on it !!as for the brake fluid - I didn't use vagcom when I replaced my ABS pump and therefore brake fluid last month mate Link to post Share on other sites
Ben Seabrook 4 Posted July 2, 2009 Report Share Posted July 2, 2009 have a look here http://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?106705 for more differences Link to post Share on other sites
dkingvr6 0 Posted July 2, 2009 Author Report Share Posted July 2, 2009 Cheers for that, owned Corrado's before first MK3 golf, so just checking all angles, bonus as well is that it has no brake compensator on the rear beam, got to do the do rear bushes this weekend, Corrado was a pig cos the brake compensator was welded to the beam with corrosion, Asked about the ABS as some on here was on about getting Vagcom linked up to cycle the ABS pump on the later type systems???cheers Link to post Share on other sites
Ben Seabrook 4 Posted July 2, 2009 Report Share Posted July 2, 2009 well I guess it would be possible if you have the full version of vag-com mate oh and start a post in the welcome section http://www.vr6oc.com/e107_plugins/forum/forum_viewforum.php?18 and introduce yourself mate Link to post Share on other sites
dkingvr6 0 Posted July 2, 2009 Author Report Share Posted July 2, 2009 cheers mate just doing so now Link to post Share on other sites
DanH 1 Posted July 2, 2009 Report Share Posted July 2, 2009 exact same as mine mate, bet its got the ob1 square side repeaters too? Link to post Share on other sites
dkingvr6 0 Posted July 2, 2009 Author Report Share Posted July 2, 2009 Hello Yes it has got the square repeaters, bit of mix and match then depending on what stock levels VW had left at face lift Link to post Share on other sites
dkingvr6 0 Posted July 2, 2009 Author Report Share Posted July 2, 2009 Hello Yes it has got the square repeaters, bit of mix and match then depending on what stock levels VW had left at face lift Link to post Share on other sites
Recommended Posts