mriley60 0 Posted July 2, 2009 Report Share Posted July 2, 2009 Hello there,Recently had head gasket removed and replaced and the head rebuilt (valve seals etc). On receiving the car back it seems to have developed a slight splutter and ever so slightly erratic idling, its no different if engine is cold or warm, and the car pulls really well through all the gears (although can sometimes feel as if it wants to rev quicker slightly). Plugs are ok, leads are brand new, any suggestions, going to clean idle valve over the weekend, any other suggestions. On another note it has a decat exhaust, some people have suggested this could cause a problem (although it was running ok before, although the lambda sensor was disconnected, I am going to try runnning with this disconnected again.Any help greatly appreciated.Cheers Link to post Share on other sites
Recommended Posts