sharky_70 0 Posted August 11, 2009 Report Share Posted August 11, 2009 about to order an inline filler so i can remove the expansion tank, where do i run the line from the end of the crackpipe to? the one that usually connects under the header?also i dont wanna remove the heating, as i was led to believe this would be a bi-product of doing this... Link to post Share on other sites
kcw 1 Posted August 11, 2009 Report Share Posted August 11, 2009 I ran one for about 6 months but got sick of no heaters. Not sure if I set it up right but i just blocked off that hose, couldn't see anything else you'd connect it to. Link to post Share on other sites
sharky_70 0 Posted August 12, 2009 Author Report Share Posted August 12, 2009 ok, so there's no way of doing this without losing the heater? Link to post Share on other sites
FishWick 21 Posted August 12, 2009 Report Share Posted August 12, 2009 Polo electric heater Link to post Share on other sites
sharky_70 0 Posted August 12, 2009 Author Report Share Posted August 12, 2009 would that hook up to the existing controls?what year etc! Link to post Share on other sites
kcw 1 Posted August 12, 2009 Report Share Posted August 12, 2009 If you ran the electric heater could you remove the gubbins behind the scuttle or is that where it mounts? I want to ditch the scuttle not still have heaters. Link to post Share on other sites
kcw 1 Posted August 14, 2009 Report Share Posted August 14, 2009 Polo electric heaterAnymore info on this Kev?? Link to post Share on other sites
Recommended Posts