Tinks 0 Posted August 12, 2009 Report Share Posted August 12, 2009 Hi peeps im currently sourcing parts for my turbo conversion and came across this on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=370233339293&viewitem=&sspagename=STRK%3AMEWAX%3AIT was wondering if anyone had mounted there turbo like this rather than the other way as iv heard it fowls with the brake fluid resevour, thought this way might be easier, also just wanted to know what sorta cash going the custom route would cost as this is pretty pricy,many thankstinks Link to post Share on other sites
FishWick 21 Posted August 13, 2009 Report Share Posted August 13, 2009 Looks like a rip off this one to me - http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-VVW-177&Category_Code=AUDIVW-DPI looked at using that setup but it will foul the steering rack / steering UJ etc and the boost path is awkward.Moving the brake resevoir is a piece of p1ss. Link to post Share on other sites
sacvwgolf 0 Posted August 13, 2009 Report Share Posted August 13, 2009 Moving the brake resevoir is a piece of p1ss.really...what sort of work is envolved?(sorry to hijack abit) Link to post Share on other sites
FishWick 21 Posted August 14, 2009 Report Share Posted August 14, 2009 See the "DIY Turbo guide" ;-)There's some pics in there, but basically you just buy a remote resevoir from Rallydesign or Merlin Motorsport, Demon tweeks etc and make a bracket for it over by the expanstion tank. I just used an old alarm bracket!Then run some hose over to the master cylinder and that's pretty much it tbh. Link to post Share on other sites
sacvwgolf 0 Posted August 15, 2009 Report Share Posted August 15, 2009 awesome..thanks alot Link to post Share on other sites
Recommended Posts