markmss 0 Posted October 28, 2009 Report Share Posted October 28, 2009 Hi i'm going to stage 2 supercharge my golf and she has just turned 100,000, i want to rebuild the engine does anybody know what parts i should replace or what tends to go in them, while this is happening i was thinking of converting it to 2.9 any other suggestions or tips for more power would be grateful. Link to post Share on other sites
cabrioman 6 Posted October 28, 2009 Report Share Posted October 28, 2009 all depends how deep ur pockets are and how far u wanna go ..... Link to post Share on other sites
markmss 0 Posted October 28, 2009 Author Report Share Posted October 28, 2009 I dont want to go as far as forged pistons or that, but open to suggestions Link to post Share on other sites
Bigjobbo 0 Posted October 28, 2009 Report Share Posted October 28, 2009 Rings, mains, big ends, crank grind, crank seals, bore hone, valve stem seals, chains. Thats a good start. should be able to get oem for 550 ish. No more oil use after that though! Link to post Share on other sites
cabrioman 6 Posted October 28, 2009 Report Share Posted October 28, 2009 as ur goin stage 2 charger id go low comp spacer plate and ARPs .... and as above rings, all new seals and bearings , chains, but as for crank grind up to u .... Link to post Share on other sites
markmss 0 Posted October 28, 2009 Author Report Share Posted October 28, 2009 Thanks guys just one more thing what compression plate would you recommend and where should i get it and for how much? Link to post Share on other sites
cabrioman 6 Posted October 28, 2009 Report Share Posted October 28, 2009 im using a 2mm one and u can get it from C2 motorsport also want a metal layred gasket Link to post Share on other sites
markmss 0 Posted October 28, 2009 Author Report Share Posted October 28, 2009 Thanks for the info think ill get the ball rolling tomorrow Link to post Share on other sites
Recommended Posts