jims13 6 Posted November 27, 2009 Report Share Posted November 27, 2009 has anyonr got a exploded diagrami fitted a new matrix , but i get no heat, i believe its the control box , but wana check my heater cables , just incase. pipes are hot going into and out of matrix, so i reckon im getting water, but no heat even after a hour of running.thanks jim Link to post Share on other sites
cabrioman 6 Posted November 27, 2009 Report Share Posted November 27, 2009 ill have a look tomo mate as i just taken my dash out and give u a call .... Link to post Share on other sites
jims13 6 Posted November 27, 2009 Author Report Share Posted November 27, 2009 CHEERS MATE , ITS DOING MY head in and i want the car for the meal on saturday, but its not fair to bring lisa in it with no heater :)O Link to post Share on other sites
Mr Grumpy 0 Posted February 2, 2010 Report Share Posted February 2, 2010 Hi GentsDid you manage to solve this? as i have the same problem, had a new matrix fitted. (I do not know if heater worked before new matrix as the matrix was bypassed when I aquired the car) No coolant leaks, car runs at constant temperature (90) both pipes to/from matrix hot, but no heater??Any help would be appreciated, fed up with my daughter constantly moaning about being cold!! Link to post Share on other sites
CALICO 130 Posted February 2, 2010 Report Share Posted February 2, 2010 Is the fan working? Link to post Share on other sites
Mr Grumpy 0 Posted February 2, 2010 Report Share Posted February 2, 2010 hi CalicoThanks for the prompt reply. yes the fan is working, Blows very cold air!! Link to post Share on other sites
Mr Grumpy 0 Posted February 6, 2010 Report Share Posted February 6, 2010 has anyonr got a exploded diagrami fitted a new matrix ' date=' but i get no heat, i believe its the control box , but wana check my heater cables , just incase. pipes are hot going into and out of matrix, so i reckon im getting water, but no heat even after a hour of running.thanks jim[/quote']Hi,Can anyone help, please?I have the same problem!! Link to post Share on other sites
shail 0 Posted February 6, 2010 Report Share Posted February 6, 2010 Sounds like the cables behind the temperature dial have detached from the cold air flap. Check that the cables at the rear of the dials. Link to post Share on other sites
Mr Grumpy 0 Posted February 6, 2010 Report Share Posted February 6, 2010 Hi ShailThanks for the prompt reply, I will check behind the dials in the morning. Link to post Share on other sites
Recommended Posts