Jump to content

whats your idle speed?


Recommended Posts

Here's the MFA functions...

the MFA has some hidden functions.

Here's how you do it:

1.Switch your MFA switch to position 1

2.Switch your car to "ON" (Don't start it!)

3.Press and hold the mode button

4.Turn the key to "Off", then back on.

5.Release the mode button.

Now when you cycle through the modes, you get this info:

-Engine MAP code

-Country code (1=Canada, 4=US)

-speedometer drive ratio

-upper RPM limit

-lower RPM limit

-deceleration fuel shutoff pressure (mbars)

-LCD Test

And, if you do this:

1.Switch your MFA switch to position 2

2.Switch your car to "ON" (Don't start it!)

3.Press and hold the mode button

4.Turn the key to "Off", then back on.

5.Release the mode button.

6.Start the car and drive

You now get these values:

-Test checksum of programmed bytes in memory

-intake manifold vacuum (mbar)

-engine rpm's

-fuel consumption

-signal from speed sensor

-oil temperture

-Outside temperature

Link to post
Share on other sites
  • 1 month later...
×
×
  • Create New...