matty.vrt 120 Posted December 20, 2009 Report Share Posted December 20, 2009 hi there im looking at upgrading my brakes and i was wondering would the r32's 345mm front brakes fit under 17" alloys. thanks Link to post Share on other sites
UnitedMotorsport 55 Posted December 20, 2009 Report Share Posted December 20, 2009 MK5 R32 brakes will be 5x122mm PCD and wont fit the MK3 PCD of 5x100 Link to post Share on other sites
Eat this 2 Posted December 20, 2009 Report Share Posted December 20, 2009 mk4 brakes are 5 x 100 but im not sure if theyll fit under 17"s mate Link to post Share on other sites
matty.vrt 120 Posted December 20, 2009 Author Report Share Posted December 20, 2009 I could get 5*100 drilled into the discs but was just wondering if they would actualy fit the disc works out 13.5" but then theres the caliper.thanks for the help so far dident no they were a different pcd. Link to post Share on other sites
UnitedMotorsport 55 Posted December 20, 2009 Report Share Posted December 20, 2009 You cant get them redrilled, as they are actually 10x112mm, which leaves no room for redrilling.I cant see them fitting inside 17" wheels. Link to post Share on other sites
thegoth 5 Posted December 20, 2009 Report Share Posted December 20, 2009 I could get 5*100 drilled into the discs Link to post Share on other sites
Moochalargo 0 Posted December 20, 2009 Report Share Posted December 20, 2009 I have Mk4 R32 front brakes on my vr! they would not fit under 17's i think. The mk 4 used the same 5 x 100 pcd as the mk 3vr but i would not do the mk5 and do not re drill the discs for 112 to 100! Link to post Share on other sites
matty.vrt 120 Posted December 20, 2009 Author Report Share Posted December 20, 2009 ok thanks for the advice i think they are starting to look like a bit of a squeese wouldent want to go any bigger toyo r888's cost enough for 17's never mind 18's Link to post Share on other sites
RIX 0 Posted December 21, 2009 Report Share Posted December 21, 2009 oe vinter wheels for r32 is 17" but you will have too tjek how the wheels are designet on the inside.why not just find some mrk 4 r32 brakes they are 334mm Link to post Share on other sites
RIX 0 Posted December 21, 2009 Report Share Posted December 21, 2009 MK5 R32 brakes will be 5x122mm PCD and wont fit the MK3 PCD of 5x100think you hit the wrong hey there 5*112 not 122;) Link to post Share on other sites
UnitedMotorsport 55 Posted December 21, 2009 Report Share Posted December 21, 2009 MK5 R32 brakes will be 5x122mm PCD and wont fit the MK3 PCD of 5x100think you hit the wrong hey there 5*112 not 122;)Your dead right Link to post Share on other sites
bungy 2 Posted December 23, 2009 Report Share Posted December 23, 2009 Mkiv r32's would be a much better option but are pretty rare. Link to post Share on other sites
matty.vrt 120 Posted December 23, 2009 Author Report Share Posted December 23, 2009 I no had some lined up on ebay £300 for the front 345mm and 310mm rears but its looking like to much bother so ive bought some porsche brakes and some adapters and 312mm tt discs i have lying about, any one else running a similar set up on there car.hoping it will be a big improvement. Link to post Share on other sites
Recommended Posts