peter.h 0 Posted January 1, 2010 Report Share Posted January 1, 2010 Hey everybody this is my project car that keeps me busy, well iv had this just over a year now and between me and the previous owner its had a lot of time and affection to get it how it is so far but im not finished with it yet. not been to any shows yet but planning on gettin to a few in 2010. the work thats been done so far...Body: cult society front and rear bumperUS tailgate with deleted lock and dewiperedfront wings and arches pulled and rolled with indicators deleted and moved to side strip.rear arches pulled and rolledfront indicators relocated to front bumper ventsm3 tail lightsfk headlightssprayed in hot chilli colourChassis: Fk silverline coiloversPorsche 3 peice twists 17" x 8.5" front and 9.5" rearsInterior: cobra monaco seats retrimmed in black leather with red pipingfalse floorrear cagefront and rear door cards in black leatherEngine: Stock VR6 with Bmc Cda induction FK Exhaust systemcarbon battery coverIce: fob imobiliserkenwood cd unitSo thats a rough list from top of my head but iv probably missed loads! anyway plans for over winter so ill keep it updated, these are:fit front strut bracerear strut bracerespray exterior handles and fit blank passanger handleinstall remote locking kitblack roofmomo 280mm wheeland the the porkas are getting sent away for some gold incrusted parts seat harnessesnew windscreenmirror polish engine partscamber shimswas digging through some old pics and found some of the build...so thats it! here's some pictures of where its at now but some are before i fitted the interior,hope you's like! oppinons welcome. Link to post Share on other sites
peter.h 0 Posted January 1, 2010 Author Report Share Posted January 1, 2010 right! here's some interior pics of what has been done so far, excuse the bad quality pics taken with my phone.. Link to post Share on other sites
tododavies 1 Posted January 1, 2010 Report Share Posted January 1, 2010 love the car mate apart from the square plates, bit to jap for me. otherwise lovely car Link to post Share on other sites
brynvr6 1 Posted January 1, 2010 Report Share Posted January 1, 2010 Very nice mate, the paint looks stunning! Link to post Share on other sites
cabrioman 6 Posted January 1, 2010 Report Share Posted January 1, 2010 nice looking motor mate .... like the seats got them in mine well comfy ..... wot subframes u using ???? Link to post Share on other sites
peter.h 0 Posted January 1, 2010 Author Report Share Posted January 1, 2010 thanks guys! the rear square plate is US to go with the Us tailgate but i have been thinking of getting a standard uk size for the front but not sure, the seats are on cobra mk3 sliding subframes nice n comfy! Link to post Share on other sites
Dazdub 0 Posted January 1, 2010 Report Share Posted January 1, 2010 Really liking it mate. You done good. What size tail pipes are they. Link to post Share on other sites
peter.h 0 Posted January 1, 2010 Author Report Share Posted January 1, 2010 thanks pal, i think these are 4" pipes, some people arn't to keen on them because they are quite big, but i think they suit it. Link to post Share on other sites
patpong_pete 0 Posted January 2, 2010 Report Share Posted January 2, 2010 BAZ Barrys old VR6nice golf had a few quid spent on this carwhats Barry driving these days ? Link to post Share on other sites
peter.h 0 Posted January 2, 2010 Author Report Share Posted January 2, 2010 ah ye its bazs old car, wasn't sure if he had been on this forum or not, not seen him recently think he moved to austrailia for a while. Link to post Share on other sites
cabrioman 6 Posted January 2, 2010 Report Share Posted January 2, 2010 u using just the cobra sliding frame or its it all one bit and bolt into the orignal subframe fixings ??? or have u got a link where u got them from ??? Link to post Share on other sites
peter.h 0 Posted January 2, 2010 Author Report Share Posted January 2, 2010 its the complete frame with slider built onto it, i got subframes from this company... http://www.rsmmotorsport.co.uk/products/productdetail.aspx?pid=383they are quite expensive but they are very strong, they use the same front centre fixing on the floor and you slide the sides into frames built into the car at the sides and put bolts through. you can either choose a subframe with a slider on it for adjusting the seat forwards and backwards or just get a solid one. Link to post Share on other sites
cabrioman 6 Posted January 2, 2010 Report Share Posted January 2, 2010 nice one cheers bit cheaper than the demon tweeks one i got for the drivers side Link to post Share on other sites
peter.h 0 Posted May 1, 2010 Author Report Share Posted May 1, 2010 Hello again... been a while since i updated this so here's what iv been doing over winter..the engine used to like this..Now look like this after fitting a mirror polished inlet manifold, dip stick,carbon fibre oil cap, carbon fibre battery cover, front upper strut bar, bmc cda filter, and a good tidy up. Link to post Share on other sites
bungy 2 Posted May 1, 2010 Report Share Posted May 1, 2010 Very nice progression and top quality work. I tip my hat to you sir.... Link to post Share on other sites
Dazdub 0 Posted May 1, 2010 Report Share Posted May 1, 2010 Million times better mate. All that hard work has paid off. Looks tasty Link to post Share on other sites
peter.h 0 Posted May 1, 2010 Author Report Share Posted May 1, 2010 thanks guys, ye im really pleased with it! Link to post Share on other sites
speedmont 0 Posted May 2, 2010 Report Share Posted May 2, 2010 sweet ride, love the colour,cheersdave Link to post Share on other sites
Recommended Posts