c6cmv 0 Posted January 29, 2010 Report Share Posted January 29, 2010 HiI currently have a z-engineering ZR1 charger on my vr6. Now its had a wee problem the small pulley on the end of the charger has worn and broke the belt. Does anyone know of anyone who can source parts etc. i need a belt and a pullyCheers Colin Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 the belts you can get over here no worries mate I use these guys - http://www.brammer.co.uk/default.aspx just give them the dimensions of the current one. As for the pulley the only place I found to buy them is RUF Komprssion in Switzerland mate http://www.ruf-kompressoren.com/wb/pages/en/home.php?lang=EN speak to a guy called Steven Winter. I have looked at getting a engineering firm near me to make up a copy of the current ones and it would work out a lot cheaper ! Link to post Share on other sites
c6cmv 0 Posted January 29, 2010 Author Report Share Posted January 29, 2010 i gave my charger to my dad whos a precicion engineer but even he is having difficulty removing the pullet it seems to be stuck solid. i had a look on there website and there is on phone numbers. really desperate now so i can get her running again Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 weird ! are you talking about the front or rear pulley mate ? their number is 0041 (0)44 856 07 61 Link to post Share on other sites
c6cmv 0 Posted January 29, 2010 Author Report Share Posted January 29, 2010 The front pulley the small one mounted on the end of the charger. it has a bolt in the centre i've undone but wont move looks like it could be loctighted on Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 ah well the whole thing should just slide out mate, been a while since I took mine apart but am going to be doing it soon so hope I remember correctly !! but might be able to help some more over the weekend when I do mine Link to post Share on other sites
c6cmv 0 Posted January 29, 2010 Author Report Share Posted January 29, 2010 is ur pulley a multi rib or a toothed one like a timing belt Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 a toothed one mate Link to post Share on other sites
c6cmv 0 Posted January 29, 2010 Author Report Share Posted January 29, 2010 tried to call ruf but cant get through to them. seems the phone number aint working. beginning to get pissed off trying to find parts Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 yeah it ain't easy mate they are very tricky to get hold off but they will eventually answer either the phone or the emails. Link to post Share on other sites
c6cmv 0 Posted January 29, 2010 Author Report Share Posted January 29, 2010 when i call i get some random german message Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 ah weird ! have you tried sending them an email mate - address it FAO Steven Winter and send it to info@ruf-kompressoren.com Link to post Share on other sites
c6cmv 0 Posted January 29, 2010 Author Report Share Posted January 29, 2010 posted them an email and the reply was that they are currently taking part in the monte carlo rally and will be back on the 8th february Link to post Share on other sites
Ben Seabrook 4 Posted January 29, 2010 Report Share Posted January 29, 2010 very helpful !!! ok mate well am hopeing to take my charger apart over the weekend so will do that and then stick the results up on here for you Link to post Share on other sites
c6cmv 0 Posted February 1, 2010 Author Report Share Posted February 1, 2010 Anyone have any luck with the pulley info i got it off the charger?? Link to post Share on other sites
Recommended Posts