FP3 0 Posted December 20, 2004 Report Share Posted December 20, 2004 Hi there, new to the site although on my 2nd VR6 - had this one, R Reg Black Highline 52K (all standard at the moment), for about 6 months & no major problems although now on cold mornings it doesn't start too well & appears not to be firing on all cylinders. Is it likely to be a plug, lead, distributer cap issue? Any advice welcome... Link to post Share on other sites
VRVIRGIN 0 Posted December 20, 2004 Report Share Posted December 20, 2004 Would have thought its either of them. When you next start it up in the morning, look under the hood. The moisture in the air should give you a small light show if its the lead ends or coilpack. Just check for sparks on all the lead ends and coilpack. If u can´t see anything then it will be your plugs. Oh, and welcome to site m8, hope this info helps you. Link to post Share on other sites
VR6Rob 0 Posted December 20, 2004 Report Share Posted December 20, 2004 Change the plugs and leads if it still doing it get the error codes checked.A R Reg VR has a coil pack insted of a distributer check the coil pack for cracks that damp could get in. Link to post Share on other sites
Recommended Posts