Ben Seabrook 4 Posted March 16, 2010 Report Share Posted March 16, 2010 OK we seem to have had a few will these fit etc etc posts recently so I thought we should build up a database of what suspension / wheels people are running to give everyone an idea of what they can get under or alongside their arches :)So, no chat, just a list like this and please include all details !!---------Suspension - FK Highsports, with a 60mm dropWheels - 16 by 8 TH Mono Compomotive et 30Tyres - 194/45/16 Toyo T1R'sArch work - front none, rears pulledIssues - none apart from a slight scrubbing on full lock. Link to post Share on other sites
craggsy 91 Posted March 16, 2010 Report Share Posted March 16, 2010 Fantastic idea Ben, I have included ET and that i run adapters, so would be worth doing to help peopleSuspension - KONI coilovers, unsure of drop but lowWheels - Porsche 928 S2 9x16 ET 57.x with 25mm adapters. OR 7x15 Comp MO ET20Tyres - Pirelli Pzero 195/45 16s on 928s and TOYO R888 195/50 15s on compsArch work - rolled all roundIssues - None with Porsche rims, sit spot on. Slight rubbing on rears with R888 but thats on track Link to post Share on other sites
Lukey. 381 Posted March 16, 2010 Report Share Posted March 16, 2010 Coilovers, dont know the drop but set so that the wheels are basically in line with the arches.17x7.5J ET35 wheels205/40/17 tyresNo arch workNo issues Link to post Share on other sites
b19drg 0 Posted March 16, 2010 Report Share Posted March 16, 2010 Coilovers FK Cheapies ! 50mm drop BBS RX11's 6x16 ET42Hankook Ventus Prime 194/45/16no arch work done , no rub at all . Could do with spacing 15mm all round though as sit recessed into arches Link to post Share on other sites
BADOIR 2 Posted March 16, 2010 Report Share Posted March 16, 2010 Sals vreibach coilovers17"audi rs front arches rolled rear arches rolled205 x40 F1,sas low as it can go for were we live about 50mmissues none...if you take your time getting on the drive :-d Link to post Share on other sites
sharky_70 0 Posted March 17, 2010 Report Share Posted March 17, 2010 kw v1 coiliesBBS RF 8x17 front ET24 8.5x17 ET16195/40 and 205/40rear arches rolleddown about 80mmissues - plenty! Link to post Share on other sites
VR6Nat 9 Posted March 17, 2010 Report Share Posted March 17, 2010 Gaz GHA Coilovers - Roughly 40mm drop17x7.5J ET30 wheels205/40/17 tyresNo arch workIssues - None as is, but scrubbing on the rear if i go any lower so will need arch work. Link to post Share on other sites
jesterwalker69 0 Posted March 17, 2010 Report Share Posted March 17, 2010 Suspension - Koni coillies all round, unsure of drop but low enough so top of rear arch sits just above alloy lipWheels - 17x7.5 ET30 ABT With 10mm spacers at front to accomodate Porsche brakesTyres - 205/40/17 Toyo T1R'sArch work - NoneIssues - none apart from a slight scrubbing at front over bumps if driven too fast! Link to post Share on other sites
aminder 4 Posted March 18, 2010 Report Share Posted March 18, 2010 Suspension - Koni Coilovers + Eibach ARB kitWheels - 9x17's ET28Tyres - 215/40/17'Arch work - Mild pull work going on at the moment although with slight lip roll would have worked without an issue.Issues - ************* To be completed ************* Link to post Share on other sites
legvw 0 Posted March 23, 2010 Report Share Posted March 23, 2010 Suspension; Spax RSX 890 coilovers, -40mm front, -60mm rear, slightly harder damping on the front.Wheels; VW Santa Monica alloys, 17", 7j, ET38Tyres; 215/45/R17 VentusNo arch work, need spacing on the rear, no rubbing. Link to post Share on other sites
MaidenVR6 26 Posted March 24, 2010 Report Share Posted March 24, 2010 Suspension: KW Inox 2 coilovers.Wheels.FRONT: OZ Racing Mito forged 3 split, 7.5x17" ET35 , BACK: OZ Mito forged 3 split 8.5x17" ET35. Gold nuts all around.Tyres: Toyo Proxes T1R 215/40-17" all around.Arch work: front none, rears pulled.Issues: Some noise in the back, but I dont give a f.... Brakes:Front: Golf mk4 R32 334mm w/yellowstuff. Back: orginal VR6 with Yellowstuff. Braided hose's. Link to post Share on other sites
Akeme 0 Posted March 25, 2010 Report Share Posted March 25, 2010 Suspension: FK Sport Edition Plus coilovers -50mm front -50mm rear KW ARBs Poly mountsWheels: TT Comp 7x17 Tyres: Avon ZZ3 205/40/17 no rubbing \o/ Link to post Share on other sites
Dragon Dave 1 Posted March 26, 2010 Report Share Posted March 26, 2010 I have Koni Sport suspension with 35mm lowered springs and 10mm lowering spring caps on the front.Tires 205/40/1720mm spacers on the rearNo arch workvery slight rubbing on the rears if I fast over a speed bump. Link to post Share on other sites
DanH 1 Posted March 26, 2010 Report Share Posted March 26, 2010 rattle canned standard wheels and rubber....ebay's finest coilovers wound down with helpers junkedno spacers yet, tho needs them on the rear 'rolled' arches...(metal bar between tyre and arch, then drive forwards :-# ) poverty spec (h) Link to post Share on other sites
Recommended Posts