Turbo Manifold??

[nezzi21 27]

hey, thinkin of throwing a turbo on the vr before i fit it into the mk2. question is which manifold would be best to go for?? are these any good??

http://cgi.ebay.co.uk/VR6-Black-Cast-Iron-Turbo-Manifold-Golf-Borra-Vento-GTi_W0QQitemZ140245131438QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item20a742e0ae

i presume not due to price but thought id ask.

[CALICO 130]

link dosnt work

[craggsy 91]

Ive fixed the link......well assuming its that one as i just type in some of the wording from post

[matty.vrt 120]

atp clone is ok as long as you get a rhd version although the port for the 38mm wastegate is more like 35mm so you hafto bore it out, the hole for the turbo also requires opening up.

[nezzi21 27]

can anyone recommend a supplier of a rhd manifold?

[matty.vrt 120]

atp tuning have there own website and if the real thing is anything as good as my fake ide highly recomend.or you could just buy a rhd clone of ebay

[nezzi21 27]

atp tuning have there own website and if the real thing is anything as good as my fake ide highly recomend.or you could just buy a rhd clone of ebay

what you running in yours if you dont mind me asking?? ( power and spec of engine? )

[lowvr 0]

i think the way to be fitting the atp clone is to mount the turbo "upside down" to the conventinal way so that the turbine side ends up on the left side

if im wrong im sure someone will correct me or put up some pics which will make a lot more sense

[FishWick 21]

I've got a genuine ATP manifold and a fake one and quality wise, they're about the same.

ATP's $350 manifold is cast at the same place as the $100 ebay ones, i.e. they're both of chinese origin.

I've had a genuine ATP warp on me and I've seen a few with the stud holes drilled in the wrong place.

The best quality one out there is probably the Kinetic Motorsport one.