PhilippVR6 0 Posted April 17, 2010 Report Share Posted April 17, 2010 I am consindering af VF Stage 2 supercharger kit for my VR6 syncro. I am also consindering turbo but I am a little worried about the durability of the syncro driveline.Do you know if there is a dealer of VF Superchargerkits in the UK? I wrote a mail to Stealth but they don't answer. Link to post Share on other sites
legvw 0 Posted April 17, 2010 Report Share Posted April 17, 2010 I know storm developments do rotrex kits http://www.stormdevelopments.co.uk/ Link to post Share on other sites
wayne_1@tiscali.co.uk 27 Posted April 17, 2010 Report Share Posted April 17, 2010 the v9f vortech supercharger is now discontinued for the vr6 but r now doing a vortech v5 supercharger for the vr6 from ns racing or rotrex from storm racing the syncro should take 350bhp without problems Link to post Share on other sites
PhilippVR6 0 Posted April 17, 2010 Author Report Share Posted April 17, 2010 I know storm developments do rotrex kits http://www.stormdevelopments.co.uk/I was actually driving with a Rotrex Supercharger on my former VR6. I bought the kit from CCR-racing in Denmark. I like Rotrex because it produces better torque at low RPM compared to Vortech. The only issues I had with the kit was:1. The engine will need its own oil cooler. The engine oil temperature rose to 120 degres, when driving only 90 mph on motorway in the summer period. 2. The original tensioner wheel needs a new location, but it leaves very little room for the wheel. The sides of the whell melted as it almost touched the mounting bracket for the supercharger.3. The additionel tensioner wheel (which is a part of the kit) had rusted during the winter. No techincal issues though but it doesn't look very good. I expected it to be made from stainless or alu. Link to post Share on other sites
john555 0 Posted April 18, 2010 Report Share Posted April 18, 2010 my rotrex kit is all stainless and alu maybes the newer kits are? also iv been told the syncro wont hold much more than 350, but i have no first hand experience of this, Link to post Share on other sites
PhilippVR6 0 Posted April 21, 2010 Author Report Share Posted April 21, 2010 my rotrex kit is all stainless and alu maybes the newer kits are? also iv been told the syncro wont hold much more than 350' date=' but i have no first hand experience of this, [/quote']I bought my kit last year in May. Where did you buy your kit? Link to post Share on other sites
john555 0 Posted April 21, 2010 Report Share Posted April 21, 2010 i bought mine last year second hand, maybe my idlers arent standard if they normaly come plastic? my kit was original from storm so they might have played around with the kit a bit Link to post Share on other sites
Recommended Posts