cornishvr6 52 Posted September 25, 2013 Author Report Share Posted September 25, 2013 Ok so about time I added a few pics of the finished article, didn't document/photo everything as I got carried away getting it finished.Decided to try the Audi engine plaque as I thought it looked nicer than the vw v6 item...controversial I know but make your own mind up, I'm still undecided.Ended up purchasing the dub power decat pipe with single lambda boss and built in flexi to complement the dub power six branch (forgot to take pics). Then needed a suitable exhaust of at least 2.5" so decided on a Jetex 2.5" non resonated system which fitted a treat. Link to post Share on other sites
Therusterman 59 Posted September 25, 2013 Report Share Posted September 25, 2013 Needs a sound clip at least to hear this masterpeice cornishvr6 1 Link to post Share on other sites
cornishvr6 52 Posted September 25, 2013 Author Report Share Posted September 25, 2013 As mentioned above with me running a single lambda i had to buy a Bosch pre cat Lambda (black plug) from the mk5 R32 to enable this setup to run as it should. Anyway cutting a long story short the car was finished and mot'd 2 days before our local show the Cornwall VW Jamboree.Heres some pics taken from the show. Link to post Share on other sites
cornishvr6 52 Posted September 25, 2013 Author Report Share Posted September 25, 2013 Link to post Share on other sites
cornishvr6 52 Posted September 25, 2013 Author Report Share Posted September 25, 2013 Link to post Share on other sites
vdub88 1 Posted September 25, 2013 Report Share Posted September 25, 2013 Beauty of a car mate Sent from my GT-I9300 cornishvr6 1 Link to post Share on other sites
richierich37 236 Posted September 26, 2013 Report Share Posted September 26, 2013 Awesome dude :-) Sent from my iPhone using mind waves! cornishvr6 1 Link to post Share on other sites
Lukey. 381 Posted September 27, 2013 Report Share Posted September 27, 2013 Never could find the videos Link to post Share on other sites
cornishvr6 52 Posted September 28, 2013 Author Report Share Posted September 28, 2013 Thanks guys...I will try upload a couple of short clips later, bit of a trial and error lesson as I've never uploaded video clips before lol. Link to post Share on other sites
VR6Pete 1,455 Posted September 28, 2013 Report Share Posted September 28, 2013 I think you can upload videos straight to the site now from a desktop, if not, then you can upload to YouTube from your iPhone/android and copy the link... Likewise with photobucket Club Chairman Link to post Share on other sites
cornishvr6 52 Posted September 28, 2013 Author Report Share Posted September 28, 2013 Cheers pete, I'm at work at the moment lol, but the couple of video clips we have are on the iPad so will give it a try this evening :-) Link to post Share on other sites
cornishvr6 52 Posted September 28, 2013 Author Report Share Posted September 28, 2013 Also fitted a 6n2 polo gti steering wheel as I got bored of the momo one I had, I opted for one of these due to it being a direct fit on the mk3 and it was leather with the red stitching to continue the touches of red And the oem them,However this will soon be coming out of the car and will be for sale...You may notice I didn't fit the head unit in the car when I refitted the dash... Better things to listen to. ;-) Link to post Share on other sites
Caddyslammed 16 Posted September 28, 2013 Report Share Posted September 28, 2013 Awesome cornishvr6 1 Link to post Share on other sites
cornishvr6 52 Posted September 28, 2013 Author Report Share Posted September 28, 2013 Awesome Cheers Brent, Is that a cheeky s4 you now have? Link to post Share on other sites
Caddyslammed 16 Posted September 28, 2013 Report Share Posted September 28, 2013 Yes mate, after losing my VR I had to do something special Link to post Share on other sites
cornishvr6 52 Posted September 28, 2013 Author Report Share Posted September 28, 2013 Yes mate, after losing my VR I had to do something special Alot of car/bhp for the money, i did look at one myself recently , couple of guys near me run them, there both members on that Audi SRS Forum, running around 500bhp and still room for camping gear/beer/shopping etc Link to post Share on other sites
dubbed_up_daz 8 Posted September 28, 2013 Report Share Posted September 28, 2013 very neat conversion Link to post Share on other sites
cornishvr6 52 Posted September 29, 2013 Author Report Share Posted September 29, 2013 very neat conversion Thanks mate. Link to post Share on other sites
djiceman 131 Posted September 30, 2013 Report Share Posted September 30, 2013 Also fitted a 6n2 polo gti steering wheel as I got bored of the momo one I had, I opted for one of these due to it being a direct fit on the mk3 and it was leather with the red stitching to continue the touches of red And the oem them,However this will soon be coming out of the car and will be for sale...You may notice I didn't fit the head unit in the car when I refitted the dash... Better things to listen to. ;-)Looks awesome bro, do all 6n2 steering wheels fit direct or is it just the GTi's? Link to post Share on other sites
vdub88 1 Posted September 30, 2013 Report Share Posted September 30, 2013 I think lupo gti ones fit too and look exactly the same, someone will correct me if im wrong though Sent from my GT-I9300 Link to post Share on other sites
cornishvr6 52 Posted September 30, 2013 Author Report Share Posted September 30, 2013 Yes as far as im aware all lupo and all 6n2 polo steering wheels are a direct fitment, The lupo gti and polo gti models benefitting from being leather rather than just plastic Link to post Share on other sites
cornishvr6 52 Posted October 1, 2013 Author Report Share Posted October 1, 2013 Okay so as some people may have spotted, I decided it was time for a change on the wheel front, found a buyer for the Porsche wheels and the search got underway. Ended up striking a deal today on a set in Northern Europe so hopefully these will land next week in time for my birthday (treat for myself lol). May reveal some pics once they land and I set to work on them ;-) VR6Pete 1 Link to post Share on other sites
VR6Pete 1,455 Posted October 1, 2013 Report Share Posted October 1, 2013 Okay so as some people may have spotted, I decided it was time for a change on the wheel front, found a buyer for the Porsche wheels and the search got underway. Ended up striking a deal today on a set in Northern Europe so hopefully these will land next week in time for my birthday (treat for myself lol). May reveal some pics once they land and I set to work on them ;-)You tease Club Chairman Link to post Share on other sites
Toxicarea 11 Posted November 26, 2013 Report Share Posted November 26, 2013 Okay so as some people may have spotted, I decided it was time for a change on the wheel front, found a buyer for the Porsche wheels and the search got underway. Ended up striking a deal today on a set in Northern Europe so hopefully these will land next week in time for my birthday (treat for myself lol).May reveal some pics once they land and I set to work on them ;-)Northern you say, hmm i´m i Sweden so it could be something from here Great build btw! Link to post Share on other sites
cornishvr6 52 Posted January 16, 2014 Author Report Share Posted January 16, 2014 So just to keep this thread alive here's a few pics from recently, the chosen wheels were a set of 17" RH ZW1's, 8.5" fronts and 9" rears, all wrapped in 205/40/17 falken ze914, the lips are aftermarket items so a lot wider than normal will update with full details soon, also finished off with mirror polished bolts to complete the look.I'm running custom made pcd adaptors which have seen a lot of trial and error to get the desired fitment and after several visits to a friends for further machining I'm pretty happy with the fitment combined with further lows and a touch of camber dialled in for good measure, Just awaiting some dry weather to get it out for a bit of a shakedown. Link to post Share on other sites
Recommended Posts