naffa 0 Posted July 27, 2010 Report Share Posted July 27, 2010 Hi guys thanks for the advice on the HT lead removal tool I needed for the Vr6.Today I have replaced the 6 plug leads but I have another lead and I cant see where it should go.Its the lead that would normally go from the coil to the dizzy cap but it doesn't seem to exist on this car.Btw its a 1997 Galaxy V6.Thanks in advance, Nathan Link to post Share on other sites
squid1 0 Posted July 27, 2010 Report Share Posted July 27, 2010 u have got the wrong leads u need yo get obd2 leads u have obd1 Link to post Share on other sites
thegoth 5 Posted July 27, 2010 Report Share Posted July 27, 2010 the six main leads are are the same. you have also got the king lead for a, very, early distributor set up. You don't need it with the later coil packs. Either throw it away, or send it to me ;-) Link to post Share on other sites
naffa 0 Posted July 27, 2010 Author Report Share Posted July 27, 2010 Thanks. So thats one of the ways that I can tell its OBD2 not OBD1? Link to post Share on other sites
gavinvr6 0 Posted July 27, 2010 Report Share Posted July 27, 2010 yes and no, mine is obd1 but runs coil pack. in your vehical it will be obd2, my bro had a galaxy v6, do a search for the difference on here there is a very good guide.also do you have manual or auto galaxy? Link to post Share on other sites
naffa 0 Posted July 27, 2010 Author Report Share Posted July 27, 2010 Its an auto. Link to post Share on other sites
Recommended Posts