F1VR6 0 Posted August 5, 2010 Report Share Posted August 5, 2010 Hi there.Can anyone tell me how to clean throttle body on a vr6 obdI?Do I have to take it off from the inlet mani?Also after cleaning MAF car is running at 1000rpm,and sometimes shortly drops in 850,so where is the fault??I checked in vagcom,two fault codes appeared:crankshaft sensor(engine was off,so probably that's why)camshaft sensor.....I think the codes were 00513 and 00515.So if any could help,it would be very appreciated.P.S. since english is not my basic language,I appologise for any mistakes! Link to post Share on other sites
CALICO 130 Posted August 5, 2010 Report Share Posted August 5, 2010 you do not need to take the throttle body off to clean it just open the flap spray with carburettor cleanor and wipe with absorbent cloth until clean did you clean the maf with electrical contact cleaner and allow to dry before use Link to post Share on other sites
F1VR6 0 Posted August 5, 2010 Author Report Share Posted August 5, 2010 hey,thanks for the aswer.Yes I did cleaned MAF with elctr.cleaner and let it dry.I also suspect in the wires that conect to throttle body(I don't know how to call them),because when I touch them(without taking of the bracket) there is a change at engine work! Link to post Share on other sites
Recommended Posts