gareth3685 0 Posted January 17, 2005 Report Share Posted January 17, 2005 I presume these wheels will fit my VR (see ebay link below) but what size tyres would I need to buy as the ones on are the wrong size?? Is this right?http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=7947221082&ssPageName=STRK:MEWA:ITCheers Link to post Share on other sites
pete8tch 0 Posted January 17, 2005 Report Share Posted January 17, 2005 think u need 205/45/16 , see wheels an tyres tho there as chart on it Link to post Share on other sites
rikkirw 0 Posted January 17, 2005 Report Share Posted January 17, 2005 Got the same wheels on mine mate with 205/50/16 tyres no problems Link to post Share on other sites
Devilfish 0 Posted January 17, 2005 Report Share Posted January 17, 2005 i have similar wheels for mine.. ask him for phtos of all the wheels as the edges corrode quite badly. also make sure you get the spigot rings for them! as i was all ready to fit mine and found that 3 were missing DOH! ill post the contact details for the BBS importers in the wheels forum, along with the part number for the spigots as i have just had my reply from germany!Regards chris. Link to post Share on other sites
gareth3685 0 Posted January 17, 2005 Author Report Share Posted January 17, 2005 What are the spigot rings?? Link to post Share on other sites
pete8tch 0 Posted January 17, 2005 Report Share Posted January 17, 2005 basically collars that fit inside the wheel centre from the back and locate the wheel on the hub Link to post Share on other sites
gareth3685 0 Posted January 18, 2005 Author Report Share Posted January 18, 2005 Will I need collars if I am just swaping with the BBS standard alloys that come on the Highline? Link to post Share on other sites
jte 0 Posted January 18, 2005 Report Share Posted January 18, 2005 I put a set of mk3 Anniversary RXIIs on my highline without knowing what spigot rings were, i have had no problems, they fitted fine. Link to post Share on other sites
acf8181 0 Posted January 18, 2005 Report Share Posted January 18, 2005 if they're genuine vw anni rims they won't need spigots. Link to post Share on other sites
gareth3685 0 Posted January 18, 2005 Author Report Share Posted January 18, 2005 They are VW, though from a Mk4. Does it make any difference? Link to post Share on other sites
acf8181 0 Posted January 18, 2005 Report Share Posted January 18, 2005 the mkIV ones are identical but half an inch narrowe i think....will make no difference.as they are vw original equiptment wheels i'd be surprised if they needed spigot rings...my bbs solitudes certainly don't. Link to post Share on other sites
Recommended Posts