Jump to content

Under drive crank pulley (vr6) ????


Recommended Posts

So will i get gains out of it...is it worth the $90

here's the description:

P10470-1.JPG

*Super Light weight T6061 T-6 Aircraft Grade Billet Aluminum

*Computer CNC Machined For Precision Balance

*5~10 Horsepower Gain

*Dyno-Tested And Prove on Race Track

*Consistent Horsepower Gain at all Engine Speed

this is for a vr6...

thoughts ,comments...

Link to post
Share on other sites

First post under yours says it all.

Really not worth it,

A lightened standard diameter pulley is a different matter. Some MK2 VR6 owners fit them as a matter of course due to the chassis leg clearance problem and they often report good things.

As said, with a lightweight flywheel, you do notice the difference.

You would be amazed how quickly the VR6 spins up with light pullies, light flywheel and the PAS pump disabled.

I am actually looking into a manual steering rack and electric water pump and just run the alternator off the crank.

Link to post
Share on other sites

First post under yours says it all.

Really not worth it' date='

A lightened standard diameter pulley is a different matter. Some MK2 VR6 owners fit them as a matter of course due to the chassis leg clearance problem and they often report good things.

As said, with a lightweight flywheel, you do notice the difference.

You would be amazed how quickly the VR6 spins up with light pullies, light flywheel and the PAS pump disabled.

I am actually looking into a manual steering rack and electric water pump and just run the alternator off the crank.

[/quote']

PAS pump???

i ordered a complete gruding ( spelling) kit.... all oem size but much lighter, only under drive part is the power steering pump pulley.

I was advised that the crank underdrive will result in my water pump turning slower and creating problems

Link to post
Share on other sites
×
×
  • Create New...