Dmoe 0 Posted September 1, 2010 Report Share Posted September 1, 2010 Hey just been cleaning under the bonnet and noticed this lead snapped offim guessing its come from the connections on the battery to the left of the circle, unless anyone knows its frome somewhere else near by. Does anyone kno what this lead is exactly and what it would be powering? Thanks in advance.. Link to post Share on other sites
xyber 1 Posted September 1, 2010 Report Share Posted September 1, 2010 Nope, but I'd say it needs connecting Link to post Share on other sites
Dmoe 0 Posted September 1, 2010 Author Report Share Posted September 1, 2010 my problem is where am i plugging it back into the battery and does it matter which one i connect it back on there is 3. Link to post Share on other sites
p0u1 14 Posted September 1, 2010 Report Share Posted September 1, 2010 it from the main loom it gos to the fuse box, connect it back to the positive terminal Link to post Share on other sites
Dmoe 0 Posted September 1, 2010 Author Report Share Posted September 1, 2010 Thanks m8 could this be the cause as to why my handbreak light is constantly on if not any ideas what would not be working because its off? Thanks again. Link to post Share on other sites
editionmatt 1 Posted September 1, 2010 Report Share Posted September 1, 2010 There was a chap on the forum that had the same problem with the light and he fixed it by clipping something back in in the reservoir. U never know Link to post Share on other sites
Antihero1981 8 Posted September 1, 2010 Report Share Posted September 1, 2010 yeah taht shoudl fix the light dude , its the sensor on the brake fluid bottle Link to post Share on other sites
Dmoe 0 Posted September 2, 2010 Author Report Share Posted September 2, 2010 eww so what do i have to do, i'll do a search of the forum now but if anyone knows would be much appreciated as car is due a MOT on Saturday... Thanks Link to post Share on other sites
Dmoe 0 Posted September 2, 2010 Author Report Share Posted September 2, 2010 Fixed that Lead today and the Handbreak light went off at first for about 3 miles and then came back on seemed after i went over a pot hole any ideas please? Thanks Link to post Share on other sites
editionmatt 1 Posted September 4, 2010 Report Share Posted September 4, 2010 Did u sort the sensor on the reservoir matey? Link to post Share on other sites
Charlievw 0 Posted September 4, 2010 Report Share Posted September 4, 2010 The light is prob on because the stick thing in the cap of the brake fluid bottle is stuck because the bit inside has fallen off. Undo the cap and clip is back in so the stick thing goes up and down freely. The stick thing should float on top of the fluid.So when its fixed and the cap is back on, tap the stick thing and it should 'bob' back up. If not then put a little zip tie round the stick thing on the outside of the bottle and it will stop the washer on the stick thing hitting the connections on the cap and putting the light on.Hope that makes sense. Lol. Link to post Share on other sites
Dmoe 0 Posted September 6, 2010 Author Report Share Posted September 6, 2010 Did u sort the sensor on the reservoir matey?Hello m8 nahh didnt sort the light out but found away of turning it off till it passed the MOT where the ABS light and Airbag light is i unplugged them which also switched the handbreak light off it still works for the Handbreak up but is off otherwise... luckley he didnt notice the lights werent comeing on... I'll take it to somewhere with VAG Com sometime to work out the rest thanks again for all the help.. Link to post Share on other sites
Dmoe 0 Posted September 6, 2010 Author Report Share Posted September 6, 2010 The light is prob on because the stick thing in the cap of the brake fluid bottle is stuck because the bit inside has fallen off. Undo the cap and clip is back in so the stick thing goes up and down freely. The stick thing should float on top of the fluid.So when its fixed and the cap is back on' date=' tap the stick thing and it should 'bob' back up. If not then put a little zip tie round the stick thing on the outside of the bottle and it will stop the washer on the stick thing hitting the connections on the cap and putting the light on.Hope that makes sense. Lol.[/quote']Thanks m8 checked that aswell and its bobing away like it should so ruled that one out... Link to post Share on other sites
Recommended Posts